This European Standard is applicable to spray booths for spray application of organic coating powder, called in this European Standard "powder spray booths", i. e. machinery and related equipment for automated and/or manual powder coating application processes. This European Standard covers powder spray booths consisting of the following equipment: forced ventilation system; air filtering and coating powder recovery system; coating powder recycling system; delivery and circulating systems for coating powder (for instance hopper or tank, preparation and transfer new powder feeding); air conditioning system; automatic cleaning system; monitoring and/or control systems; fire detection and interlocking system; explosion protection system; mechanical aspects of product handling systems and reciprocators inside the powder spray booth; electrical equipment; powered doors and gates joined together within or at a partially or totally enclosed structure (limited by walls, called space) for the controlled processing of spray application of organic coating powder. This European Standard deals with the significant hazards, hazardous situations and events relevant to powder spray booths when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). NOTE Powder spray booths are classified in Annex C. In addition, it defines: the content of marking; the minimum requirements for use. This European Standard does not cover: a) powder spray booths in which the coating is applied by immersion in a fluidised bed; b) powder spray booths for application of non combustible and inorganic coating powder and flock; c) spraying equipment as covered by EN 1953, EN 50050, EN 50177; d) machinery for the supply or circulation of coating material under pressure as covered by prEN 12621; e) all loading and unloading systems; f) automatic systems, e. g. robots as covered by EN 775 and control systems of powder spray booths influencing these systems (e. g. teaching of the spraying process); g) powder spray booths for application of coating powder for food-stuffs and pharmaceuticals; h) spraying areas characterized by an open space for application of organic powder coating material which is limited only by one side wall used for extraction of exhaust ventilation; i) limiting walls of powder spray booths if they are constituent parts of a building. This European Standard is not applicable to powder spray booths which are manufactured before the date of publication of this European Standard by CEN.
EN 12981:2005+A1:2009 Referenced Document
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 294:1992 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
EN 619:2002 Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads*， 2024-04-20 Update
EN 775:1992 Manipulating Industrial Robots - Safety; (ISO 10218:1992 Modified)
EN 811:1996 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Lower Limbs
EN 954-1:1996 Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design
EN 971-1:1996 Paints and Varnishes - Terms and Definitions for Coating Materials - Part 1: General Terms
EN 12981:2005+A1:2009 history
2009EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
2005EN 12981:2005 Coating plants - Spray booths for application of organic powder coating material - Safety requirements (Incorporates Amendment A1: 2009)