DIN 357:2016 PDF

DIN 357:2016 Referenced Document

DIN 10:2009 Squares of parallel shanks for rotating tools
DIN 13-1:1999 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 2181:2015 Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4
DIN 2184-1:2015 Taps and cold forming taps - Part 1: Long type; General plan of dimensions
DIN 2197-1:2015 Screwing taps - Part 1: Technical delivery conditions for ground high-speed steel taps
DIN 336:2003 Diameters of drills for minor diameters of tapped threads
DIN 352:2016-01
DIN 371:2016-01 Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25
DIN 374:2016 Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4
DIN 376:2016-02 Machine screwing taps for coarse pitch metric ISO-threads M1,6 to M68
DIN 802-4:2012 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
DIN EN 22857:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
DIN ISO 11054:2006 Cutting tools - Designation of high-speed steel groups (ISO 11054:2006) English version of DIN ISO 11054:2006-09

2016 DIN 357:2016-02 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
2016 DIN 357:2016 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
2008 DIN 357:2008 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
1998 DIN 357:1998 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
1970 DIN 357:1971
1970 DIN 357:1923