GOST 9650-1980
Pins. Specifications
Home
GOST 9650-1980
Standard No.
GOST 9650-1980
Release Date
1980
Published By
RU-GOST R
Latest
GOST 9650-1980
Replace
GOST 9650-1971
Scope
This standard applies to axles with an outer diameter from 3 to 100 mm with a length-to-diameter ratio of not more than 15
GOST 9650-1980 Referenced Document
GOST 1414-1975
Constructional rolled steel of improved and high cutting machinability. Specifications
GOST 1759.4-1987
Bolts, screws and studs. Mechanical properties and test methods
*
,
1987-04-20 Update
GOST 2789-1973
Surface roughness. Parameters and characteristics
GOST 380-1988
Common quality carbon steel. Grades
*
,
1988-04-20 Update
GOST 4543-1971
Structural alloy steel bars. Specifications
GOST 5632-1972
High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
*
,
2024-04-20 Update
GOST 9.301-1986
Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
*
,
1986-04-20 Update
GOST 9.306-1985
Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. Symbols
*
,
1985-04-20 Update
GOST 9012-1959
Metals. Method of Brinell hardness measurement
*
,
2024-04-20 Update
GOST 9013-1959
Metals. Method of measuring Rockwell hardness
*
,
2024-04-20 Update
GOST 9378-1975
Surface roughness comparison specimens. Technical requirements
ISO 2340:1986
Clevis pins without head
*
,
1986-11-01 Update
ISO 2341:1986
Clevis pins with head
*
,
1986-11-01 Update
GOST 9650-1980 history
1980
GOST 9650-1980
Pins. Specifications
0000
GOST 9650-1971
Copyright ©2024 All Rights Reserved