EN ISO 11665-6:2015
Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement method of the activity concentration

Standard No.
EN ISO 11665-6:2015
Release Date
2015
Published By
European Committee for Standardization (CEN)
Status
 2020-05
Replace By
EN ISO 11665-6:2020
Latest
EN ISO 11665-6:2020
Replace
FprEN ISO 11665-6:2014
Scope
This part of ISO 11665 describes point measurement procedures for 222 Rn. It provides guidance on how to carry out a point measurement of radon activity concentration within a few minutes at a specified location in open and enclosed atmospheres. This measurement method is used to quickly determine the radon activity concentration in the air. The result cannot be used to predict the annual value of radon activity concentration. This type of measurement is therefore not applicable for assessing year-round exposure. The measurement method described can be used for air samples with radon activity concentrations of more than 50 Bq m-3. NOTE Using a suitable device, the radon activity concentration can be determined, for example in the soil and at the interface between a material and the atmosphere, using point measurements (see also ISO 11665-7).

EN ISO 11665-6:2015 Referenced Document

  • IEC 61577-1:2006 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General principles
  • IEC 61577-2:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222 Rn and 220 Rn measuring instruments
  • ISO 11665-1:2012 Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods
  • ISO 11665-7:2012 Measurement of radioactivity in the environment - Air: radon-222 - Part 7: Accumulation method for estimating surface exhalation rate
  • ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application
  • ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
  • ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

EN ISO 11665-6:2015 history

  • 2020 EN ISO 11665-6:2020 Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement methods of the activity concentration (ISO 11665-6:2020)
  • 2015 EN ISO 11665-6:2015 Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement method of the activity concentration



Copyright ©2024 All Rights Reserved