ASTM F99-07(2015)
Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- Standard No.
- ASTM F99-07(2015)
- Release Date
- 2007
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F99-21
- Latest
- ASTM F99-21
- Scope
5.1 Flexible barrier materials are universally used across industries and produced by a myriad of suppliers. They may be monolayer materials or complex composite structures. However, even with the diversity of material, there are still basic requirements that all flexible barrier materials should exhibit.
5.2 Flexible barrier material requirements may be divided into two categories, initial material qualification, and routine production and receipt requirements to ensure the purchaser receives exactly what is ordered. While all requirements may be included in the written specification, initial qualification tests may only be needed prior to the first order. Routine production and receipt requirements should be adhered to on every order. Initial qualification requirements are indicated with each clause, where applicable.
5.3 This guide provides an understanding of the requirements needed for the manufacture, purchase, and acceptance of flexible barrier materials. Appropriate test methods for compliance are also cited.
Note 1: All test methods for a particular requirement may not be cited due to specific or unique circumstances. For additional guidance on applicable methods, refer to Guide F2097.
5.4 The specification and its requirements should be mutually agreed to by the supplier and purchaser of the product. This helps ensure that the flexible barrier materials will comply with the specified requirements.
1.1 This guide defines the requirements and considerations for flexible barrier materials.
1.2 This guide addresses some critical printing requirements for flexible barrier materials.
1.3 Guidance is provided on specification requirements and considerations for flexible barrier materials intended to be purchased as rollstock.
1.4 If the flexible barrier material is intended to be purchased in the form of a pre-made sterile barrier system, Guide F2559 should be referenced.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM F99-07(2015) Referenced Document
- ASTM D4321 Standard Test Method for Package Yield of Plastic Film
- ASTM F17 Standard Terminology Relating to Flexible Barrier Materials
- ASTM F2097 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
- ASTM F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule
- ASTM F2250 Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials*， 2024-04-20 Update
- ASTM F2251 Standard Test Method for Thickness Measurement of Flexible Packaging Material
- ASTM F2475 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials*， 2024-04-20 Update
- ASTM F2559 Standard Guide for Writing a Specification for Sterilizable Peel Pouches
- ASTM F88 Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F99-07(2015) history
- 2021 ASTM F99-21 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- 2007 ASTM F99-07(2015) Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- 2007 ASTM F99-07(2011) Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- 2007 ASTM F99-07 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
- 1976 ASTM F99-76(2001) Standard Practice for Preparation of Flexible Barrier Material Specifications
- 2001 ASTM F99-76(1993) Standard Practice for Preparation of Flexible Barrier Material Specifications
