ASTM D2914-15
Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)

Standard No.
ASTM D2914-15
Release Date
2015
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D2914-15(2022)
Latest
ASTM D2914-15(2022)
Scope

5.1 Sulfur dioxide is a major air pollutant, commonly formed by the combustion of sulfur-bearing fuels. The Environmental Protection Agency (EPA) has set primary and secondary air quality standards (7) that are designed to protect the public health and welfare.

5.2 The Occupational Safety and Health Administration (OSHA) has promulgated exposure limits for sulfur dioxide in workplace atmospheres (8).

5.3 These methods have been found satisfactory for measuring sulfur dioxide in ambient and workplace atmospheres over the ranges pertinent in 5.1 and 5.2.

5.4 Method A has been designed to correspond to the EPA-Designated Reference Method (7) for the determination of sulfur dioxide.

1.1 These test methods cover the bubbler collection and colorimetric determination of sulfur dioxide (SO2) in the ambient or workplace atmosphere.

1.2 These test methods are applicable for determining SO2 over the range from approximately 25 μg/m3 (0.01 ppm(v)) to 1000 μg/m3 (0.4 ppm(v)), corresponding to a solution concentration of 0.03 μg SO2/mL to 1.3 μg SO2/mL. Beer's law is followed through the working analytical range from 0.02 μg SO2/mL to 1.4 μg SO2/mL.

1.3 The lower limit of detection is 0.075 μg SO2/mL (1),2 representing an air concentration of 25 μg SO2/m3 (0.01 ppm(v)) in a 30–min sample, or 13 μg SO2/m3 (0.005 ppm(v)) in a 24–h sample.

ASTM D2914-15 Referenced Document

  • ASTM D1193 Standard Specification for Reagent Water
  • ASTM D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres*2024-04-20 Update
  • ASTM D1357 Standard Practice for Planning the Sampling of the Ambient Atmosphere
  • ASTM D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • ASTM D3195 Standard Practice for Rotameter Calibration
  • ASTM D3609 Standard Practice for Calibration Techniques Using Permeation Tubes
  • ASTM D3631 Standard Test Methods for Measuring Surface Atmospheric Pressure
  • ASTM E1 Standard Specification for ASTM Thermometers
  • ASTM E2251 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
  • ASTM E275 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers

ASTM D2914-15 history

  • 2022 ASTM D2914-15(2022) Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • 2015 ASTM D2914-15 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • 2001 ASTM D2914-01(2007) Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • 2001 ASTM D2914-01 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • 1995 ASTM D2914-95 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)



Copyright ©2024 All Rights Reserved