EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems. Only soda lime silicate glasses are taken into consideration in this European Standard. Plastic glazing is excluded from the scope of this European Standard. Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 "Structural sealant glazing system". All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2014. When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.
EN 13022-1:2014 Referenced Document
EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 12150-1:2000 Glass in Building - Thermally Toughened Soda Lime Silicate Safety Glass - Part 1: Definition and Description
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Products standard*， 2024-04-20 Update
EN 1279-1:2004 Glass in Building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
EN 1279-2:2002 Glass in building Insulating glass units Part 2: Long term test method and requirements for moisture penetration*， 2024-04-20 Update
EN 1279-3:2002 Glass in building Insulating glass units Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances*， 2024-04-20 Update
EN 1279-4:2002 Glass in building Insulating glass units Part 4: Methods of test for the physical attributes of edge seals
EN 1279-6:2002 Glass in building Insulating glass units Part 6: Factory production control and periodic tests
EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 14179-1:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 14179-2:2005 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description*， 2024-04-20 Update
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1991-1-1:2002 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight and imposed loads for buildings
EN 1991-1-3:2003 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 572-1:2012 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties (Incorporates Amendment A1: 2016)
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN ISO 12543-1:2011 Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011)
EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
EN ISO 12543-3:2011 Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011)
EN 13022-1:2014 history
2014EN 13022-1:2014 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
2006EN 13022-1:2006 Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing Incorporates Amendment A1: 2010