ASTM D4867/D4867M-09(2014)
Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

Standard No.
ASTM D4867/D4867M-09(2014)
Release Date
2009
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D4867/D4867M-22
Latest
ASTM D4867/D4867M-22
Scope

4.1 This test method can be used to test asphalt concrete mixtures in conjunction with mixture design testing to determine the potential for moisture damage, to determine whether or not an antistripping additive is effective, and to determine what dosage of an additive is needed to maximize the effectiveness. This test method can also be used to test mixtures produced in plants to determine the effectiveness of additives under the conditions imposed in the field.

1.1 This test method covers procedures for preparing and testing asphalt concrete specimens for the purpose of measuring the effect of water on the tensile strength of the paving mixture. This test method is applicable to dense mixtures such as those appearing in the Table for Composition of Bituminous Paving Mixtures in Specification D3515. This test method can be used to evaluate the effect of moisture with or without antistripping additives including liquids and pulverulent solids such as hydrated lime or portland cement.

1.2 The values stated in either SI units or inch-pound units in parentheses shall be regarded separately as standard. The values in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D4867/D4867M-09(2014) Referenced Document

  • ASTM D1074 Standard Test Method for Compressive Strength of Bituminous Mixtures
  • ASTM D1561 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
  • ASTM D2041 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
  • ASTM D2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures*， 2024-04-20 Update
  • ASTM D3203 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
  • ASTM D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
  • ASTM D3496 Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
  • ASTM D3515 Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
  • ASTM D3549 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
  • ASTM D3665 Standard Practice for Random Sampling of Construction Materials
  • ASTM D4013 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
  • ASTM D4123 Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures
  • ASTM D6926 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
  • ASTM D979 Standard Practice for Sampling Bituminous Paving Mixtures

ASTM D4867/D4867M-09(2014) history

Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures


Copyright ©2024 All Rights Reserved