This standard specifies the requirements for enamelled rectangular copper wire of class 105, singly coated based on polyvinyl acetal resin, which may be modified. However, the copper wire must possess the chemical homogeneity of the resin prototype and meet all specified wire requirements. Separation grade 105 is a thermal grade that requires a minimum temperature index of 105 and a thermal shock temperature of not less than 155 ° C. The temperature index corresponds to The temperature is not necessarily the recommended temperature at which the wire will operate and is determined by a variety of factors, including the type of equipment involved. The ranges of nominal conductor diameters covered by this standard are as follows:
——Width: 2.0 mm to 16.0 mm - Thickness: Above 0.80 mm and below 5.60 mm Class 1 and 2 conductors are included in this standard and apply to the entire conductor range. The sum of specified widths and thicknesses and specified width/thickness ratios are given in IEC 60317-0-2. ?
KS C IEC 60317-17:2014 history
0000 KS C IEC 60317-17-2014(2019)
2014KS C IEC 60317-17:2014 Specifications for particular types of winding wires — Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105