IEC 61169-51:2015 PDF

Scope: This part of IEC 61169@ which is a sectional specification (SS)@ provides information and rules for the preparation of detail specifications (DS) for type QLI R.F. coaxial connectors with quick lock. The connectors are normally used with 50 ?? corrugated cable and flexible cables for middle power applications in an operating range up to 6 GHz. It describes the interface dimensions for general purpose connectors with gauging information and the mandatory tests selected from IEC 61169-1 applicable to all detail specifications relative to type QLI connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers all tests schedules and inspection requirements. NOTE Metric dimension are original dimensions. All un-dimensioned pictorial configurations are for reference purpose only.

IEC 61169-51:2015 Referenced Document

IEC 60529:1989 Degrees of protection provided by enclosures (IP code)
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 62037-1:2012 Passive r.f. and microwave devices, Intermodulation level measurement - Part 1: General requirements and measuring methods
IEC 62037-2:2012 Passive r.f. and microwave devices, Intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial assemblies
IEC 62037-3:2012 Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors
IEC 62037-4:2012 Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables
IEC 62037-5:2013 Passive R.F. and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulation in filters
IEC 62037-6:2013 Passive R.F. and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
ISO 21207:2004 Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying

2015 IEC 61169-51:2015 Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ώ (type QLI)