ISO 13577-2:2014
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems

Standard No.

ISO 13577-2:2014

Release Date

2014

Published By

International Organization for Standardization (ISO)

Status

Be replaced 2023-06

Replace By

ISO 13577-2:2023

Latest

ISO 13577-2:2023

Scope

This part of ISO 13577 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE). NOTE The general safety requirements common to TPE are provided in ISO 13577-1 (See introduction). This part of ISO 13577 deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex A, when used as intended and under the conditions foreseen by the manufacturer. This part of ISO 13577 covers: — fuel pipework downstream of and including the manual isolating valve; — combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system; — burner(s), burner system and ignition device; — functional requirements for safety related control system. This part of ISO 13577 applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE. For thermal or catalytic post combustion and waste incineration, this part of ISO 13577 applies only to auxiliary burners designed to start-up and/or support the process. The pressure hazard of the piping and components covered by this part of ISO 13577 is within the maximum pressure/size relationship of category I as described in normative Annex E. This part of ISO 13577 also gives the necessary requirements regarding information for use. This part of ISO 13577 does not cover hazards from heating generated by electricity. This part of ISO 13577 does not deal with the hazards created by the release of flammable substances from the products processed in the TPE. This part of ISO 13577 is not applicable to combustion and fuel handling systems: — of welding machines; — up-stream of the TPE manual isolating valve. This part of ISO 13577 is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.  1 

ISO 13577-2:2014 Referenced Document

• IEC 60204-1:2005 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
• IEC 60730-2-6:2007 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
• ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
• ISO 13574 Industrial furnaces and associated processing equipment - Vocabulary*， 2015-02-01 Update
• ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
• ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
• ISO 5817:2003 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections
• ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
• ISO 7005-1:2011 Pipe flanges - Part 1: Steel flanges for industrial and general service piping systems
• ISO 7005-2:1988 Metallic flanges; part 2: cast iron flanges
• ISO 7005-3:1988 Metallic flanges; part 3: copper alloy and composite flanges
• ISO 8434-1:2007 Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors
• ISO 8434-2:2007 Metallic tube connections for fluid power and general use - Part 2: 37° flared connectors
• ISO 8434-3:2005 Metallic tube connections for fluid power and general use - Part 3: O-ring face seal connectors

ISO 13577-2:2014 history

• 2023 ISO 13577-2:2023 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
• 2014 ISO 13577-2:2014 Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems