SAE AS1946D-2014
Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic

Standard No.

SAE AS1946D-2014

Release Date

2014

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AS1946E-2015

Latest

SAE AS1946F-2018

Scope

This SAE Aerospace Standard (AS) defines the requirements for polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assemblies suitable for use in aerospace hydraulic, fuel and lubricating oil systems at temperatures between -67 °F and 450 °F for Class I assemblies, -67 °F and 275 °F for Class II assemblies, and at nominal pressures up to 1500 psi. The hose assemblies are also suitable for use within the same temperature and pressure limitations in aerospace pneumatic systems where some gaseous diffusion through the wall of the PTFE liner can be tolerated. The use of these hose assemblies in pneumatic storage systems is not recommended. In additio

SAE AS1946D-2014 Referenced Document

• ASME B46.1-2009 Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)*， 2024-04-20 Update
• ASME Y14.100-2013 Engineering Drawing Practices*， 2024-04-20 Update
• ASME Y14.24-2012 Types and Applications of Engineering Drawings*， 2024-04-20 Update
• ASME Y14.34M-1996 Associated lists
• ASME Y14.35M-1997 Revision of Engineering Drawings and Associated Documents
• ASTM A262-13 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels*， 2024-04-20 Update
• ASTM D471-12 Standard Test Method for Rubber Propertymdash;Effect of Liquids*， 2024-04-20 Update
• MIL 

SAE AS1946D-2014 history

• 2018 SAE AS1946F-2018 Hose Assembly@ Polytetrafluoroethylene@ Metallic Reinforced@ Up to 1500 psi and 450 °F@ Hydraulic and Pneumatic
• 2015 SAE AS1946E-2015 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic
• 2014 SAE AS1946D-2014 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic
• 2013 SAE AS1946C-2013 Hose Assembly@ Polytetrafluoroethylene@ Metallic Reinforced@ Up to 1500 psi and 450 °F@ Hydraulic and Pneumatic
• 2012 SAE AS1946SUP1A-2012 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 ° F, Hydraulic and Pneumatic (Supplement 1)
• 2007 SAE AS1946B-2007 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic
• 2004 SAE AS1946SUP1-2004 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic (Supplement 1)
• 2003 SAE AS1946B-2003 Hose Assembly@ Polytetrafluoroethylene@ Metallic Reinforced@ Up to 1500 psi and 450 Degrees F@ Hydraulic and Pneumatic
• 2000 SAE AS1946A-2000 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic
• 1994 SAE AS1946-1994 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 450°F (232°C) AND 1500 psi (10 500 kPa), PROCUREMENT SPECIFICATION
• 1990 SAE AS1946-1990 Hose Assembly@ Polytetrafluoroethylene (PTFE)@ up to 450 Degrees F (232 Degrees C) and 1500 psi (10 500 KPa)@ Procurement Specification