SAE AMS5518M-2014
Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength

Standard No.

SAE AMS5518M-2014

Release Date

2014

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS5518N-2020

Latest

SAE AMS5518N-2020

Scope

This specification covers a corrosion-resistant steel in the form of sheet and strip. These products have been used typically for parts requiring strength and moderate forming or bending, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.

SAE AMS5518M-2014 Referenced Document

• ASTM A370-13 Standard Test Methods and Definitions for Mechanical Testing of Steel Products*， 2024-04-20 Update
• ASTM E290-13 Standard Test Methods for Bend Testing of Material for Ductility*， 2024-04-20 Update
• ASTM E384-11 Standard Test Method for Knoop and Vickers Hardness of Materials*， 2024-04-20 Update
• SAE AMS2242 TOLERANCES Stainless Steel Sheet and Strip

SAE AMS5518M-2014 history

• 2020 SAE AMS5518N-2020 Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength
• 2014 SAE AMS5518M-2014 Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 Ksi (1034 MPa) Tensile Strength
• 2008 SAE AMS5518L-2008 Steel, Corrosion Resistant, Sheet and Strip 18Cr 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength
• 2003 SAE AMS5518K-2003 Steel, Corrosion Resistant, Sheet and Strip 18Cr 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa) Tensile Strength
• 1999 SAE AMS5518J-1999 Steel@ Corrosion Resistant@ Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled@ 150 ksi (1034 MPa) Tensile Strength (UNS S30100)
• 1992 SAE AMS5518H-1992 Steel@ Corrosion Resistant@ Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled@ 150 ksi (1034 MPa) Tensile Strength
• 1990 SAE AMS5518G-1990 STEEL SHEET AND STRIP@ CORROSION RESISTANT 18Cr - 8Ni (SAE 30301) Cold Rolled@ 150@000 psi (1034 MPa) Tensile Strength (UNS S30100)
• 1984 SAE AMS5518F-1984 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (SAE 30301) Cold Rolled, 150,000 psi (1035 MPa) Tensile Strength
• 1978 SAE AMS5518E-1978 Steel@ Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled@ 150@000 psi (1034 MPa) Tensile Strength (UNS S30100)
• 1971 SAE AMS5518D-1971 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (SAE 30301) Cold Rolled, 150,000 psi (1034 MN/m2)
• 1952 SAE AMS5518C-1952 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni Cold Rolled - 150,000 psi
• 1947 SAE AMS5518B-1947 STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (Cold Rolled - 150,000 psi)
• 1942 SAE AMS5518A-1942 STEEL SHEET AND STRIP, CORROSION RESISTANT Cold Rolled High Ductility Type 18 Chromium - 8 Nickel (150,000 T.S.)
• 1941 SAE AMS5518-1941 STEEL SHEET AND STRIP, CORROSION RESISTANT Cold Rolled High Ductility Type 18 Chromium - 8 Nickel (150,000 T.S.)