ASTM D5868-01(2014)
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic 40;FRP41; Bonding
- Standard No.
- ASTM D5868-01(2014)
- Release Date
- 2001
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D5868-01(2023)
- Latest
- ASTM D5868-01(2023)
- Scope
5.1 Due to the increased use of adhesively-bonded FRP as a result of the inherent advantages afforded by bonded rather than mechanically-fastened joints (particularly the alleviation of stress risers and stress cracking), there is a need for tests by which joints of various FRP substrates and adhesives may be compared. This test method is intended to meet such a need.
5.2 Additional information on significance and use may be found in Guide D4896.
1.1 This test method describes a lap shear test for use in measuring the bonding characteristics of adhesives for joining fiber reinforced plastics to themselves and to metals. The method is applicable to random and fiber oriented FRP.
1.2 This test method is intended to complement Test Method D1002 and extend the application to single-lap shear adhesive joints of fiber-reinforced plastic (FRP) adherends. This test method is useful for generating comparative apparent shear strength data for joints made from a number of FRP materials, providing a means by which FRP surface treatments may be compared.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D5868-01(2014) Referenced Document
- ASTM D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D2093 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
- ASTM D3163 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
- ASTM D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
- ASTM D5573 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
- ASTM D907 Standard Terminology of Adhesives
- ASTM E4 Standard Practices for Force Verification of Testing Machines
- SAE J1525 Lap Shear Test for Automotive Type Adhesives for Fiber reinforced plastic (FRP) Bonding
ASTM D5868-01(2014) history
- 2023 ASTM D5868-01(2023) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- 2001 ASTM D5868-01(2014) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic 40;FRP41; Bonding
- 2001 ASTM D5868-01(2008) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- 2001 ASTM D5868-01 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
- 1995 ASTM D5868-95 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
