SAE AMS3100D-2013
Adhesion Promoter For Polysulfide Sealing Compounds

Standard No.
SAE AMS3100D-2013
Release Date
2013
Published By
Society of Automotive Engineers (SAE)
Status
Replace By
SAE AMS3100E-2021
Latest
SAE AMS3100E-2021
Scope
This specification covers adhesion promoters in the form of a liquid, either in bulk or aerosol form. This product has been typically used to enhance the adhesion of polysulfide sealing compounds or adhesives to AMS-C-27725 integral fuel tank coating, MIL-PRF-23377 epoxy primer, MIL-PRF-85582 waterborne primer, and bare titanium alloy substrates, but usage is not limited to such applications. Care should be exercised around plastic substrates (e.g. polycarbonates, acrylics) as the formulary solvents may tend to craze these surfaces. AMS3100 Class 2 may contain halogenated solvents that could cause stress-corrosion cracking when used on titanium alloys which

SAE AMS3100D-2013 Referenced Document

  • ASTM D1193-06 Standard Specification for Reagent Water
  • ASTM D3960-05 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings*， 2024-04-20 Update

SAE AMS3100D-2013 history



Copyright ©2024 All Rights Reserved