ASTM B556-90(2012)
Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

Standard No.
ASTM B556-90(2012)
Release Date
1990
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM B556-90(2013)
Latest
ASTM B556-90(2023)
Scope

4.1 The thickness of a decorative chromium coating is often critical to its performance.

4.2 This procedure is useful for an approximate determination when the best possible accuracy is not required. For more reliable determinations, the following methods are available: Methods B504, B568, and B588.

4.3 This test assumes that the rate of dissolution of the chromium by the hydrochloric acid under the specified conditions is always the same.

1.1 This guide covers the use of the spot test for the measurement of thicknesses of electrodeposited chromium coatings over nickel and stainless steel with an accuracy of about ±208201;% (Section 9). It is applicable to thicknesses up to 1.2 μm.2

Note 1Although this test can be used for coating thicknesses up to 1.2 μm, there is evidence that the results obtained by this method are high at thicknesses greater than 0.5 μm.3 In addition, for coating thicknesses above 0.5 μm, it is advisable to use a double drop of acid to prevent depletion of the test solution before completion of the test.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM B556-90(2012) history

  • 2023 ASTM B556-90(2023) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 2018 ASTM B556-90(2018) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 1990 ASTM B556-90(2013) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 1990 ASTM B556-90(2012) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 1990 ASTM B556-90(2007) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 1990 ASTM B556-90(2002) Standard Guide for Measurement of Thin Chromium Coatings by Spot Test
  • 1990 ASTM B556-90(1997) Standard Guide for Measurement of Thin Chromium Coatings by the Spot Test



Copyright ©2024 All Rights Reserved