This part of GB 15579 specifies the safety requirements and performance requirements for arc welding power sources and plasma cutting systems. This standard applies to power supplies for arc welding and similar processes, intended for industrial and professional use, supplied by voltages not exceeding those specified in Table 1 of IEC 60038, or driven by mechanical equipment. This section does not apply mainly to non-professional use limit load manual arc welding power supply. This section does not apply to the detection of welding power sources that are in the maintenance cycle or after repairs.
GB 15579.1-2013 Referenced Document
GB 15579.12-2012 Arc welding equipment.Part 12:Coupling devices for welding cables
GB 19212.5-2006 Safety of power transformers, power supply units and similar. Part 5: Particular requirements for isolating transformers for general use
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 11918-2001 Plugs,socket-outlets and couplers for industrial purposes--Part 1: General requirements
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems.Part 1:Principles,requirements and tests
GB/T 16935.3-2005 Insulation coordination for equipment within low-voltage systems Part 3:Use of coating,potting or moulding for protection against pollution
GB/T 17045-2008 Protection against electric shock.Common aspects for installation and equipment
GB/T 2900.83-2008 Electrotechnical terminology.Electrical and magnetic devices
GB/T 4026-2010 Basic and safety principles for man-machine interface,marking and identification.Identification of equipment terminals and conductor terminations
GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 5013.6-2008 Rubber insulated cables of rated voltages up to and including 450/750 V.Part 6: Arc welding electrode cables
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products.Part 16:Test flames.50W horizontal and vertical flame test methods
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment.Part 2: Graphical symbols
GB 15579.1-2013 history
2013GB 15579.1-2013 Arc welding equipment.Part 1:Welding power sources
2004GB 15579.1-2004 Arc welding equipment-Part 1:Welding power sources
1995GB 15579-1995 Safety requirements for arc welding equipment. Part 1: Welding power sources