ISO 13686:2013
Natural gas - Quality designation

Standard No.
ISO 13686:2013
Release Date
2013
Published By
International Organization for Standardization (ISO)
Latest
ISO 13686:2013
Scope
This International Standard specifies the parameters required to describe finally processed and, where required, blended natural gas. Such gas is referred to subsequently in this text simply as "natural gas". The main text of this International Standard contains a list of these parameters, their units and references to measurement standards. Informative annexes give examples of typical values for these parameters, with the main emphasis on health and safety. In defining the parameters governing composition, physical properties and trace constituents, consideration has also been given to existing natural gases to ensure their continuing viability. The question of interchangeability is dealt with in Annex A (see Clause A.2).

ISO 13686:2013 Referenced Document

  • ISO 10101-1 Natural gas — Determination of water by the Karl Fischer method — Part 1: General requirements*2022-08-24 Update
  • ISO 10101-2 Natural gas — Determination of water by the Karl Fischer method — Part 2: Volumetric procedure*2022-08-24 Update
  • ISO 10101-3 Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure*2022-08-31 Update
  • ISO 11541 Natural gas - Determination of water content at high pressure
  • ISO 13443 Natural gas - Standard reference conditions; Technical Corrigendum 1
  • ISO 14532 Natural gas - Vocabulary*2014-06-01 Update
  • ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
  • ISO 6326-1 Natural gas - Determination of sulfur compounds - Part 1: General introduction
  • ISO 6326-3 Natural gas; determination of sulfur compounds; part 3: determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry
  • ISO 6326-5 Natural gas; determination of sulfur compounds; part 5: Lingener combustion method
  • ISO 6327 Gas analysis; Determination of the water dew point of natural gas; Cooled surface condensation hygrometers
  • ISO 6570 Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods
  • ISO 6974-1 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition; Technical Corrigendum 1
  • ISO 6974-2 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations
  • ISO 6974-3 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 3: Precision and bias*2018-09-30 Update
  • ISO 6974-4 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxyde and C<(Index)1> to C<(Index)5> and C<(Index)6+> hydrocarbons for a laboratory and on-line measuring system using
  • ISO 6974-5 Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons*2014-07-01 Update
  • ISO 6974-6 Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns; Technical Corrigendum 1
  • ISO 6975 Natural gas - Extended analysis - Gas-chromatographic method
  • ISO 6976:1995 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition
  • ISO 6978-1 Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine
  • ISO 6978-2 Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy; Technical Corrigendum 2

ISO 13686:2013 history

Natural gas - Quality designation



Copyright ©2024 All Rights Reserved