This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4, which are relevant to stationary four sided moulding machines with a maximum working width of 350 mm and a maximum speed of the integrated work-piece feed of 200 m/min, with electrical and/or electronic control system, hereafter referred to as "machines" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse of the machine (see 6.3 c)). For the definition of a stationary machine, see 3.22. This European Standard deals also with hazards relating to the following optional work units: universal spindle; glass bead cutting unit. This European Standard is not applicable to machines designed for machining logs which have not previously been machined. This European Standard does not deal with any hazards relating to: a) in-feed devices (magazines, hoppers, etc.); NOTE For mechanical in-feed devices which also prevent access to the in-feed opening, see 5.3.7.2. b) the combination of single machines with any other machine as part of a line; c) out-feed devices (e. g. mechanical handling systems) except for hazards related to ejection from the machine due to climb cutting. This European Standard is not applicable to four sided moulding machines which are manufactured before the date of its publication as EN.
EN 12750:2013 Referenced Document
EN 50178:1997 Electronic Equipment for Use in Power Installations
EN 50370-1:2005 Electromagnetic compatibility (EMC) Product family standard for machine tools Part 1: Emission
EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines Part 1: General requirements (Incorporates Amendment A1: 2009; Incorporating corrigendum February 2010)
EN 60439-1:1999 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies (Incorporates Amendment A1: 2004; Incorporating Corrigendum No. 1)
EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
EN 61496-1:2004 Safety of machinery ?Electro-sensitive protective equipment Part 1: General requirements and tests Incorporates Amendment A1: 2008; Incorporating corrigendum February 2010
EN 61800-5-2:2007 Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional*， 2024-04-20 Update
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room ISO 354:2003
EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)*， 2024-04-20 Update
EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)
EN ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)*， 2024-04-20 Update
EN 12750:2013 history
2013EN 12750:2013 Safety of woodworking machines - Four sided moulding machines