JGJ/T 294-2013
Technical specification for strength testing of high strength concrete (English Version)
- Standard No.
- JGJ/T 294-2013
- Language
- Chinese, Available in English version
- Release Date
- 2013
- Published By
- Professional Standard - Construction Industry
- Status
- Latest
- JGJ/T 294-2013
- Replace By
- ABNT NBR 9781-2013
- Scope
- This procedure is suitable for testing the compressive strength of concrete with strength grades C50~C100 in engineering structures. This procedure does not apply to the testing of concrete compressive strength under the following circumstances: 1. Concrete that suffers from severe frostbite, chemical erosion, and fire, resulting in inconsistent quality between the inside and outside, and concrete with uneven surfaces; 2. Concrete that is wet and formed by special processes; 3. Thickness Concrete components less than 150mm; 4 Concrete where the ambient temperature is lower than 0°C or higher than 40°C.
JGJ/T 294-2013 Referenced Document
- GB 175 General Purpose Portland Cement*， 2023-11-27 Update
- GB/T 50081 Standards for test methods of physical and mechanical properties of concrete*， 2019-10-12 Update
- GB/T 50344 "Technical Standards for Building Structure Testing"*， 2020-06-05 Update
- JG 237 Mould for concrete specimens
- JG/T 5004 Ultrasonic concrete tester
- JGJ 52 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete
JGJ/T 294-2013 history
- 2013 JGJ/T 294-2013 Technical specification for strength testing of high strength concrete
JGJ/T 294-2013 Technical specification for strength testing of high strength concrete was changed to ABNT NBR 9781-2013 Concrete paving units — Specification and test methods .
