YD/T 2497-2013 Mobile payment.technical requirements for contactless radio frequency interface based on 13.56MHz near field communication technology (English Version)
Professional Standard - Post and Telecommunication
Latest
YD/T 2497-2013
Scope
This standard specifies the mobile payment contactless radio frequency (referred to as contactless radio frequency) interface and protocol working at 13.56 MHz and using short-range communication technology, including the air connection between the contactless card (PICC) and the card reader (PCD). interface, the air interface between peer transport entities (NFCIP-1), and the same device that supports multiple modes switching between different modes (NFCIP-2). For the air interface between contactless card (PICC) and card reader (PCD), this standard specifies the technical requirements for Type A and Type B interfaces between PCD and PICC, including spectrum power and signal interface, Type A and Type B Interaction between commands, initialization and collision avoidance, transmission protocol and physical characteristics of PICC. For the air interface between peer transmission entities, this standard specifies the technical requirements of NFCIP-1, including active communication mode, passive communication mode, modulation method, coding, transmission rate, frame structure, initialization process and the steps during the initialization process. Anti-collision requirements. In addition, this standard also defines the transmission protocol including protocol activation and data exchange methods. PCD, PICC, and NFCIP-1 protocols all stipulate short-range wireless communication equipment working at 13.56MHz. Without affecting the existing 13.56MHz communication system, for devices that comply with both PCD reader and writer functions and NFCIP-1, this standard specifies a communication mode selection mechanism (NFCIP-2) so that the device can work in NFCIP-1 1 mode, PCD reader/writer mode, the selected communication mode is required to follow their respective standards. This standard applies to short-range wireless communication equipment operating at 13.56MHz and using Type A and Type B of PCD and PICC, NFCIP-1 protocol, and NFCIP-2 protocol.
YD/T 2497-2013 Referenced Document
ISO/IEC 10373-6 Amendment 2 - Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects - Enhancements for harmonization*, 2020-11-27 Update
ISO/IEC 13239 Information technology - Telecommunications and information exchange between systems - High-level data link control (HDLC) procedures
ISO/IEC 14443-1 Cards and security devices for personal identification — Contactless proximity objects — Part 1: Physical characteristics*, 2018-04-12 Update
ISO/IEC 14443-2 Corrigendum 2 - Cards and security devices for personal identification - Contactless proximity objects - Part 2: Radio frequency power and signal interface
ISO/IEC 14443-3 Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision — Amendment 3: Time binding of PICC to PCD data interchange for enhanced detection of relay attacks
ISO/IEC 14443-4 Cards and security devices for personal identification — Contactless proximity objects — Part 4: Transmission protocol — Amendment 3: Time binding of PICC to PCD data interchange for enhanced detection of relay attacks
ISO/IEC 15693-2 Cards and security devices for personal identification — Contactless vicinity objects — Part 2: Air interface and initialization*, 2019-04-23 Update
2013YD/T 2497-2013 Mobile payment.technical requirements for contactless radio frequency interface based on 13.56MHz near field communication technology