JB/T 6041-2013 (English Version) PDF

Scope: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of wheeled engineering machinery drive axle main reducer gear pairs. This standard applies to the spiral bevel gear pair of the drive axle main reducer of wheeled engineering machinery (hereinafter referred to as the gear pair).

JB/T 6041-2013 Referenced Document

GB/T 11365-1989 Accuracy of bevel and hypoid gears
GB/T 15822.1 Non-destructive testing.Magnetic particle testing.Part 1:General principles
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 3478.1-2008 Straight cylindrical involute splines.Metric module,side fit.Part 1:Generalities
GB/T 3478.2-2008 Straight cylindrical involute splines.Metric module, side fit.Part 2: 30°pressure angle dimensions tables
GB/T 3480.5-2008 Calculation of load capacity of spur and helical gears.Part 5:Strength and quality of materials
GB/T 5216-2004 Structural steels subject to end-quench hardenability requirements
JB/T 51148 Wheel loaders. Reliability test method, failure mode and assessment
JB/T 5928 Construction machinery.Drive axle.Test methods*， 2014-05-06 Update
JB/T 5929 Drive axle for engineering machinery - Reliability testing method
JB/T 5942 Engineering machinery General technical specifications for free forgings*， 2018-07-04 Update
JB/T 5944 General technical requirements for heat treatment parts of construction machinery*， 2019-05-01 Update

2013 JB/T 6041-2013 Driving axle in wheel type construction machinery.Gear pairs of main reducer.Technical specifications
1992 JB/T 6041-1992 Gear pair of main reducing gear of driving axle of industrial wheeled machines Technical conditions