ASTM E1265-04(2013)
Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

Standard No.

ASTM E1265-04(2013)

Release Date

2004

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM E1265-04(2021)

Latest

ASTM E1265-04(2021)

Scope

5.1 This test method permits the evaluation of both the acoustical and mechanical performance of pneumatic exhaust silencers designed for quieting compressed gas exhausts (usually air). The data can be used by manufacturers to assess or improve their products, or by users to select or specify a silencer. The data acquired using this measurement method allow for performance comparisons of competitive products and aid in the selection of an appropriate device.

5.2  Flow rate is an important parameter to consider when the application involves machinery or equipment that requires compressed air or other gases to be exhausted rapidly. For example, in an automatic pneumatic press, compressed air must be exhausted rapidly to avoid a premature second cycle. For this reason, flow ratio is reported in addition to acoustical performance.

1.1 This test method covers the laboratory measurement of both the acoustical and mechanical performance of pneumatic exhaust silencers designed for quieting compressed gas (usually air) exhausts from orifices connected to pipe sizes up to ³/₄ in. NPT. This test method is not applicable for exhausts performing useful work, such as part conveying, ejection, or cleaning. This test method evaluates acoustical performance using A-weighted sound level measurements.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.

ASTM E1265-04(2013) Referenced Document

• ASTM C634 Standard Terminology Relating to Building and Environmental Acoustics

ASTM E1265-04(2013) history

• 2021 ASTM E1265-04(2021) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
• 2004 ASTM E1265-04(2013) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
• 2004 ASTM E1265-04 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
• 1990 ASTM E1265-90(1995)e1 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers