ASTM D7339-12
Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography

Standard No.
ASTM D7339-12
Release Date
2012
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D7339-18
Latest
ASTM D7339-18
Scope
1.1 This test method describes an analytical procedure for identifying and quantifying the masses of individual volatile organic compounds (individual VOCs or IVOCs) that are emitted into a flow of air from carpet specimens and collected on sorbent sampling tubes during emissions testing.

1.2 This test method will be used in conjunction with a standard practice for sampling and preparing carpet specimens for emissions testing. If a specific chamber practice is not available for the carpet specimens, this standard test method should be used in conjunction with approved standard practices for emissions testing and sample preparation.

1.3 When used in conjunction with standard practices for carpet specimen preparation and collection of vapor-phase emissions , this test method will provide a standardized means of determining the levels of IVOC in the exhaust stream of the emissions test chamber/cell. If this test method is used with a reliable practice for emissions testing, these IVOC levels can be used to determine the emission rate from a unit quantity (usually surface area) of the sample material under test.

1.4 VOCs in the exhaust stream of an emiss......

ASTM D7339-12 Referenced Document

  • ASTM D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres*2024-04-20 Update
  • ASTM D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
  • ASTM D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
  • ASTM D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
  • ASTM D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
  • ASTM D6196 Standard Practice for Selection of Sorbents and Pumped Sampling/Thermal Desorption Analysis Procedures for Volatile Organic Compunds in Air
  • ASTM D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
  • ASTM D7143 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
  • ASTM D7706 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
  • ASTM E355 Standard Practice for Gas Chromatography Terms and Relationships*2024-04-20 Update
  • ISO 10580 Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions
  • ISO 16000-6 Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
  • ISO 16000-9 Indoor air

ASTM D7339-12 history

  • 2018 ASTM D7339-18 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
  • 2012 ASTM D7339-12 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
  • 2007 ASTM D7339-07 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
Standard Test Method for  Determination of Volatile Organic Compounds Emitted from Carpet  using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography



Copyright ©2024 All Rights Reserved