DS/EN 61003-1:2004
Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance

Standard No.

DS/EN 61003-1:2004

Release Date

2004

Published By

Danish Standards Foundation

Latest

DS/EN 61003-1:2004

Replace

DS/EN 61003-1-1995

Scope

This part of IEC 61003 is applicable to pneumatic and electric industrial-process instruments using measured values that are continuous signals in accordance with IEC 60382, or IEC 60381-1. The other input value (i.e. the set point value) may be either a mechanical (position, force, etc.) or a standard signal. It should be noted that tests specified herein may be applied to instruments which have other continuous measured values, provided that due allowance is made for such differences. These instruments may be used as controllers or as switches for alarm and other similar purposes. Instruments with feedback are not covered by this standard.

DS/EN 61003-1:2004 history

• 2004 DS/EN 61003-1:2004 Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance
• 1994 DS/EN 61003-1:1994 Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating the performance