DS/EN ISO 2719:2003
Determination of flash point - Pensky-Martens closed cup method

Standard No.

DS/EN ISO 2719:2003

Release Date

2003

Published By

Danish Standards Foundation

Status

Be replaced 2021-04

Replace By

DS/EN ISO 2719:2021

Latest

DS/EN ISO 2719:2021

Replace

DS/EN 22719:1994

Scope

This standard describes two procedures, A and B, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, lubricating oils, liquids that tend to form a surface film under the test conditons, and other liquids. It is applicable for liquids with a flash point above 40 celcius degrees.

DS/EN ISO 2719:2003 history

• 2021 DS/EN ISO 2719:2021 Determination of flash point – Pensky-Martens closed cup method – Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
• 2003 DS/EN ISO 2719:2003 Determination of flash point - Pensky-Martens closed cup method
• 1994 DS/EN 22719:1994 Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method

DS/EN ISO 2719:2003 Determination of flash point - Pensky-Martens closed cup method has been changed from DS/EN 22719:1994 Petroleum products and lubricants. Determination of flash point. Pensky-Martens closed cup method.