DS/EN 14638-3:2010
Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods

Standard No.

DS/EN 14638-3:2010

Release Date

2010

Published By

Danish Standards Foundation

Status

Be replaced 2012-04

Replace By

DS/EN 14638-3/AC:2012

Latest

DS/EN 14638-3/AC:2012

Scope

This European Standard specifies minimum requirements concerning material, design, construction and workmanship, procedures and tests at manufacture of refillable transportable welded cylinders made of carbon steel, justified by experimental methods, of water capacities from 0,5 l up to and including 150 l for compressed or liquefied gases and of a test pressure up to 90 bar.NOTE This European Standard may also be used as a guideline for cylinders less than 0,5 l water capacity.This European Standard is primarily intended for industrial gases other than LPG but may also be applied for LPG. However, for dedicated LPG cylinders see EN 14140 [5], prepared by C

DS/EN 14638-3:2010 history

• 2012 DS/EN 14638-3/AC:2012 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods
• 2010 DS/EN 14638-3:2010 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods