SAE AMS5637H-2012
Steel, Corrosion Resistant, Bars and Wire 18Cr 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relived 125 ksi (862 MPa) Tensile Strength

Standard No.

SAE AMS5637H-2012

Release Date

2012

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced 2018-07

Replace By

SAE AMS5637J-2018

Latest

SAE AMS5637K-2023

Scope

This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides. These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.

SAE AMS5637H-2012 Referenced Document

• ASTM E8-04 Standard Test Methods for Tension Testing of Metallic Materials*， 2024-04-19 Update
• ASTM E8M-04 Standard Test Methods for Tension Testing of Metallic Materials [Metric] *， 2024-04-19 Update
• SAE AMS2241 TOLERANCES Stainless Steel Bars
• SAE AMS2248 CHEMICAL CHECK ANALYSIS LIMITS Wrought Heat and Corrosion Resistant Steels
• SAE AMS2371 QUALITY ASSURANCE SAMPLING OF CORROSION AND HEAT RESISTANT ALLOYS Wrought Products and Forging Stock
• SAE AMS2806 IDENTIFICATION Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Heat and Corrosion Resistant Steels and Alloys

SAE AMS5637H-2012 history

• 2023 SAE AMS5637K-2023 Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength
• 2018 SAE AMS5637J-2018 Steel@ Corrosion Resistant@ Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated@ Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength (UNS S30200)
• 2012 SAE AMS5637H-2012 Steel, Corrosion Resistant, Bars and Wire 18Cr 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relived 125 ksi (862 MPa) Tensile Strength
• 2011 SAE AMS5637E-2011 STEEL BARS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125,000 psi (860 MPa) Tensile Strength
• 2006 SAE AMS5637G-2006 Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength
• 2001 SAE AMS5637G-2001 Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength UNS S30200
• 2000 SAE AMS5637F-2000 Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength
• 1993 SAE AMS5637F-1993 Steel@ Corrosion Resistant@ Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength (UNS S30200)
• 1987 SAE AMS5637E-1987 STEEL BARS@ CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125@000 psi (860 MPa) Tensile Strength (UNS S30200)
• 1981 SAE AMS5637D-1981 STEEL BARS, CORROSION RESISTANT 18Cr - 9.0Ni (SAE 30302) Cold Drawn, 125,000 psi (860 MPa) Tensile Strength
• 1979 SAE AMS5637C-1979 STEEL BARS, CORROSION RESISTANT 18Cr - 8.5Ni (SAE 30302) Cold Drawn, 125,000 psi (862 MPa) Tensile Strength
• 1971 SAE AMS5637B-1971 STEEL BARS CORROSION RESISTANT 18Cr - 8.5Ni (SAE 30302) Cold Drawn, 125,000 psi (862 MN/m2)
• 1952 SAE AMS5637A-1952 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 125,000 psi
• 1949 SAE AMS5637-1949 STEEL, CORROSION RESISTANT 18Cr - 8Ni (SAE 30302) Cold Drawn - 125,000 psi