SAE AMS4172E-2005 PDF

Scope: This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing. These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding and where distortion during machining must be minimized, but usage is not limited to such applications.

SAE AMS4172E-2005 history

2019 SAE AMS4172G-2019 Aluminum Alloy@ Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching (UNS A96061)
2013 SAE AMS4172F-2013 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511 or T4510) Solution Heat Treated and Stress Relieved by Stretching
2011 SAE AMS4172C-2011 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching
2010 SAE AMS4172E-2010 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching
2005 SAE AMS4172E-2005 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching
1996 SAE AMS4172D-1996 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching (UNS A96061)
1986 SAE AMS4172B-1986 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4511) Solution Heat Treated and Stress Relieved by Stretching
1980 SAE AMS4172A-1980 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4511) Stress Relief Stretched and Straightened
1969 SAE AMS4172-1969 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4511) Stress Relief Stretched and Straightened