ASTM B211M-12
Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

Standard No.

ASTM B211M-12

Release Date

2012

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM B211M-12e1

Latest

ASTM B211/B211M-23

Scope

1.1 This specification covers rolled or cold-finished bar, rod, and wire in alloys (Note 1) and tempers as shown in Table 2.

Note 18212;Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

Note 28212;The term cold finished is used to indicate the type of surface finish, sharpness of angles, and dimensional tolerances produced by drawing through a die.

Note 38212;See Specification B221M for aluminum and aluminum-alloy extruded bars, rods, wire, shapes, and tubes; and Specification B316/B316M for aluminum and aluminum-alloy rivet and cold-heading wire and rods.

1.2 Alloy and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.

1.3 This specification is the metric counterpart of Specification B211.

1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

TABLE 1 Chemical Composition Limits^A,B,C,D

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Bi	Pb	Sn	Other ElementsE		Aluminum
													Each	TotalF
1100G	0.95 Si + Fe		0.05–0.20	0.05	...	...	...	0.10	...	...	...	...	0.05	0.15	99.00 minH
2011 ASTM B211M-12 history 2023 ASTM B211/B211M-23 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire 2019 ASTM B211/B211M-19 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire 2012 ASTM B211M-12e1 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) 2012 ASTM B211M-12 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) 2003 ASTM B211M-03 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] 2002 ASTM B211M-02 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] 2001 ASTM B211M-01 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] 2000 ASTM B211-00 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire 1999 ASTM B211-99 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire 1995 ASTM B211M-95a Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric] Copyright ©2024 All Rights Reserved