SAE AMS2673E-2012
Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)

Standard No.

SAE AMS2673E-2012

Release Date

2012

Published By

Society of Automotive Engineers (SAE)

Status

Be replaced

Replace By

SAE AMS2673E-2018

Latest

SAE AMS2673F-2022

Scope

This specification covers the engineering requirements for producing brazed joints of aluminum and aluminum alloys by immersion in molten flux bath. This process has been used typically for joining aluminum and selected aluminum alloys.

SAE AMS2673E-2012 Referenced Document

• ASTM D1179-10 Standard Test Methods for Fluoride Ion in Water*， 2024-04-19 Update
• ASTM D1193-06 Standard Specification for Reagent Water
• SAE AMS3415 FLUX, ALUMINUM DIP BRAZING 1030 F Fusion Point
• SAE AMS4063 ALUMINUM ALLOY SHEET, CLAD ONE SIDE 1.25Mn (No. 11-0 Brazing Sheet)
• SAE AMS4064 ALUMINUM ALLOY SHEET, CLAD TWO SIDES 1.25Mn(No. 12-0 Brazing Sheet)
• SAE AMS4185 ALUMINUM ALLOY BRAZING WIRE 12Si (718)
• SAE AMS4255 ALUMINUM ALLOY SHEET@ CLAD ONE SIDE 0.6Mg - 0.35Si - 0.28Cu (No. 21 Brazing Sheet) as Fabricated
• SAE AMS4256 ALUMINUM ALLOY SHEET@ CLAD TWO SIDES 0.6Mg - 0.35Si - 0.28Cu (No. 22 Brazing Sheet) as Fabricated (UNS A86951)

SAE AMS2673E-2012 history

• 2022 SAE AMS2673F-2022 Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
• 2018 SAE AMS2673E-2018 Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
• 2012 SAE AMS2673E-2012 Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
• 2006 SAE AMS2673D-2006 Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
• 2001 SAE AMS2673D-2001 Brazing, Aluminum and Aluminum Alloys Molten Flux (Dip)
• 1995 SAE AMS2673C-1995 ALUMINUM MOLTEN FLUX (DIP) BRAZING
• 1991 SAE AMS2673B-1991 ALUMINUM MOLTEN FLUX (DIP) BRAZING
• 1968 SAE AMS2673A-1968 ALUMINUM MOLTEN FLUX (DIP) BRAZING
• 1960 SAE AMS2673-1960 ALUMINUM MOLTEN FLUX (DIP) BRAZING