ASTM D5282-05(2012)
Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
- Standard No.
- ASTM D5282-05(2012)
- Release Date
- 2005
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D5282-05(2020)
- Latest
- ASTM D5282-05(2020)
- Scope
The magnitude of the changes in the electrical properties of the silicone fluid is of importance in determining the contamination of the fluid by the test specimen.
Physical and chemical changes in the fluid, such as color and acidity, also indicate solubility or other adverse effects of the test specimen on the fluid.
Physical changes of the test specimen, such as hardness, swelling, and discoloration, show the effect of the fluid on the test specimen and are used to determine the suitability of the material for use in silicone fluid.
A material meeting the criteria recommended does not necessarily indicate suitability for use in electrical equipment. Other properties must also be considered. Additionally, certain materials containing additives may meet the requirements of these test methods yet be unsatisfactory when subjected to longer-term evaluations.
These test methods may be used as a guide for testing the compatibility of materials for silicone fluids other than 50 cSt poly-dimethyl siloxane fluid, but different criteria for judgment may be necessary.
1.1 These test methods cover screening for the compatibility of construction materials with silicone fluid for use in electrical equipment.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D5282-05(2012) Referenced Document
- ASTM D1169 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1933 Standard Specification for Nitrogen Gas as an Electrical Insulating Material
- ASTM D2129 Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
- ASTM D2225 Standard Test Methods for Silicone Fluids Used for Electrical Insulation
- ASTM D2413 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
- ASTM D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D4243 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
- ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
- ASTM D4559 Standard Test Method for Volatile Matter in Silicone Fluid
- ASTM D4652 Standard Specification for Silicone Fluid Used for Electrical Insulation
- ASTM D5837 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
- ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
- ASTM D828 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
- ASTM D877 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
- ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
- ASTM D924 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
- ASTM D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D5282-05(2012) history
- 2020 ASTM D5282-05(2020) Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
- 2005 ASTM D5282-05(2012) Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
- 2005 ASTM D5282-05 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
- 1998 ASTM D5282-98 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
