ASTM D3639/D3639M-92(2011)e1
Standard Test Method for Classification of Asbestos by Quebec Standard Test

Standard No.
ASTM D3639/D3639M-92(2011)e1
Release Date
1992
Published By
American Society for Testing and Materials (ASTM)
Status
 2019-01
Replace By
ASTM D3639/D3639M-92(2019)
Latest
ASTM D3639/D3639M-92(2019)
Scope

The Quebec Standard Testing Machine classifies milled chrysotile asbestos grades according to the mass fractions retained on each screen. Specimens that are not properly conditioned prior to testing or that have excessive moisture content (above 3 % in accordance with Method D2987), or both, may give erratic and false results.

Some amphibole asbestos fibers may be classified by this test method but a standard classification for these has not been established.

1.1 This test method covers a procedure for dry classification of chrysotile asbestos fiber by length distribution.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 Warning8212;Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 1.3 for a specific hazard warning. ^REFERENCE:

ASTM Standards:

D2590 Test Method for Sampling Chrysotile Asbestos

D2946 Terminology for Asbestos and Asbestosx02013;Cement Products

D2987 Test Method for Moisture Content of Asbestos Fiber

D3879 Test Method for Sampling Amphibole Asbestos (Withdrawn)

E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves

E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

ASTM Adjunct:

Quebec Asbestos Testing Machine Construction and Operation Instructions

Quebec Asbestos Mining Association Documents:

Quebec Standard Classification of Chrysotile Asbestos Grades

Specifications and Drawings for Quebec Standard Asbestos Testing Machine Model No. 2

ASTM D3639/D3639M-92(2011)e1 Referenced Document

  • ASTM D2590 Standard Test Method for Sampling Chrysotile Asbestos*1998-04-19 Update
  • ASTM D2946 Standard Terminology for Asbestos and Asbestos-Cement Products*1998-04-19 Update
  • ASTM D2987 Standard Test Method for Moisture Content of Asbestos Fiber
  • ASTM D3879 Standard Test Method for Sampling Amphibole Asbestos
  • ASTM E11 Standard Specification for Wire Cloth and Sieves for Testing Purposes*1995-04-19 Update
  • ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

ASTM D3639/D3639M-92(2011)e1 history

Standard Test Method for Classification of Asbestos by Quebec Standard Test



Copyright ©2024 All Rights Reserved