DIN EN ISO 11402:2005 PDF

Standard No.: DIN EN ISO 11402:2005
Release Date: 2005
Published By: German Institute for Standardization
Status: Be replaced
Replace By: DIN EN ISO 11402:2005-09
Latest: DIN EN ISO 11402 Berichtigung 1:2006-11
Replace: DIN EN ISO 9020:1998 DIN EN ISO 9397:1997 DIN EN ISO 11402:1998 DIN EN ISO 11402:2004

Scope: This International Standard specifies three methods for determining the free-formaldehyde content in the following: a) Phenolic resins, by potentiometric titration in aqueous or organic solution (hydroxylamine hydrochloride procedure). The method is applicable to resins with free-formaldehyde contents up to and including 15 % by mass. For free-formaldehyde contents between 15 % by mass and 30 % by mass, it may be necessary to adjust the concentrations of the standard volumetric solutions used accordingly. b) Amino resins and furan resins (sulfite procedure). The method is applicable to resins resulting from the polycondensation of urea and melamine with formaldehyde and to furan resins resulting from the polycondensation of furfuryl alcohol with formaldehyde without further modification. c) Condensation resins (KCN procedure), including urea resins, furan resins, melamine resins and phenolic resins, as well as combinations and modifications of these resins.

DIN EN ISO 11402:2005 Referenced Document

ISO 15528 Paints, varnishes and raw materials for paints and varnishes — Sampling*， 2020-05-13 Update
ISO 3696 Water for analytical laboratory use; Specification and test methods
ISO 385-1 Laboratory glassware; Burettes; Part 1 : General requirements
ISO 648 Laboratory glassware - Single-volume pipettes*， 2008-10-01 Update

2006 DIN EN ISO 11402 Berichtigung 1:2006-11 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006
2006 DIN EN ISO 11402 Berichtigung 1:2006 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006
2005 DIN EN ISO 11402:2005-09 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005
2005 DIN EN ISO 11402:2005 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005
0000 DIN EN ISO 11402:2004
0000 DIN EN ISO 11402:1998
0000 DIN EN ISO 9397:1997