International Organization for Standardization (ISO)
Latest
ISO 22734-2:2011
Scope
This part of ISO 22734 defines the construction, safety and performance requirements of packaged hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
This part of ISO 22734 is applicable to hydrogen generators that use the following types of ion transport medium:
— group of aqueous bases;
— solid polymeric materials with acidic function group additions, such as acid proton exchange membrane (PEM).
This part of ISO 22734 is applicable to hydrogen generators intended for indoor and outdoor residential use in sheltered areas, such as car-ports, garages, utility rooms and similar areas of a residence. This part of Portable generators as well as hydrogen generators that can also be used to generate electricity, such as reversible fuel cells, are excluded from the scope of this part of ISO 22734.
Hydrogen generators that also supply oxygen as a product are excluded from the scope of this part of ISO 22734.
This part of ISO 22734 is intended to be used for certification purposes.
ISO 22734-2:2011 Referenced Document
IEC 60034-1 Rotating electrical machines - Part 1: Rating and performance*, 2022-02-14 Update
IEC 60079-0 Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements*, 2019-06-27 Update
IEC 60079-29-2 Explosive atmospheres – Part 29-2: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen*, 2015-03-16 Update
IEC 60079-2:2007 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
IEC 60079-30-1 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
IEC 60204-1:2005 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60335-1:2010 Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60364-6:2006 Low-voltage electrical installations - Part 6: Verification
IEC 60439-1 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60439-2 Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
IEC 60439-3 Low-voltage switchgear and controlgear assemblies-Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use-Distribution boards*, 2024-04-19 Update
IEC 60439-5 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks
IEC 60445 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors*, 2021-07-16 Update
IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*, 2024-04-19 Update
IEC 60730-1:2010 Automatic electrical controls for household and similar use - Part 1: General requirements
IEC 60947-2 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60947-3 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Corrigendum 1*, 2021-10-01 Update
IEC 60947-4-2 Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters*, 2020-06-26 Update
IEC 60947-4-3 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads*, 2020-07-14 Update
IEC 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices*, 2024-03-26 Update
IEC 60947-5-2 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches*, 2019-10-18 Update
IEC 60947-5-3 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)*, 2013-08-01 Update
IEC 60947-5-5 Appareillage à basse tension – Partie 5-5: Appareils et éléments de commutation pour circuits de commande – Appareil d'arrêt d'urgence électrique à accrochage mécanique (Edition 1.2; Consolidated Reprint)*, 2016-02-01 Update
IEC 60947-6-1 Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment*, 2021-03-01 Update
IEC 60947-6-2 Corrigendum 2 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)*, 2023-06-06 Update
IEC 60947-7-1 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 60947-7-2 Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
IEC 60950-1:2005 Information technology equipment - Safety - Part 1: General requirements
IEC 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 61069-7 Mesure@ commande et automation dans les processus industriels – Appréciation des propriétés d'un système en vue de son évaluation – Partie 7: ?valuation de la sécurité d'un système (Edition 2.0)*, 2016-06-01 Update
IEC 61131-1 Programmable controllers - Part 1: General information
IEC 61131-2 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI)*, 2017-08-23 Update
IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems – ALL PARTS together with a Commented version (see Functional Saf
IEC 61511-1 Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements*, 2024-04-19 Update
IEC 61558-1 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests*, 2017-09-29 Update
ISO 10286 Gas cylinders — Vocabulary*, 2021-11-11 Update
ISO 10790 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)*, 2015-04-01 Update
ISO 11119-1 Gas cylinders - Design, construction and testing of refillable composite gas cylinders and tubes - Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l*, 2020-10-31 Update
ISO 11119-2 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharin*, 2023-05-11 Update
ISO 11119-3 Gas cylinders — Design, construction and testing of refillable composite gas cylinders and tubes — Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sh*, 2023-07-11 Update
ISO 1182 Reaction to fire tests for products — Non-combustibility test*, 2020-06-04 Update
ISO 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction
ISO 12499 Industrial fans — Mechanical safety of fans — Guarding — Amendment 1
ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO 13850 Safety of machinery - Emergency stop function - Principles for design*, 2015-10-01 Update
ISO 13854 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body*, 2017-11-01 Update
ISO 13857 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs*, 2019-10-10 Update
ISO 14511 Measurement of fluid flow in closed conduits — Thermal mass flowmeters*, 2019-01-10 Update
ISO 14847 Rotary positive displacement pumps - Technical requirements
ISO 15534-1 Ergonomic design for the safety of machinery - Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
ISO 15534-2 Ergonomic design for the safety of machinery - Part 2: Principles for determining the dimensions required for access openings
ISO 15649 Petroleum and natural gas industries - Piping
ISO 16111 Transportable gas storage devices - Hydrogen absorbed in reversible metal hydride*, 2018-07-31 Update
ISO 16528-1 Boilers and pressure vessels - Part 1: Performance requirements
ISO 17398 Safety colours and safety signs - Classification, performance and durability of safety signs
ISO 22734-1 Hydrogen generators using water electrolysis process - Part 1: Industrial and commercial applications
ISO 26142 Hydrogen detection apparatus - Stationary applications
ISO 3746 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
ISO 3864-2 Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels*, 2016-12-01 Update
ISO 4126-1 Safety devices for protection against excessive pressure — Part 1: Safety valves AMENDMENT 1*, 2013-01-01 Update
ISO 4126-2 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices*, 2018-11-30 Update
ISO 4126-6 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices*, 2014-06-01 Update
ISO 7000 Graphical symbols for use on equipment — Index and synopsis*, 2019-07-12 Update
ISO 7866 Gas cylinders — Seamless aluminum alloy gas cylinders intended for refilling — Design, construction and testing — Amendment 2
ISO 9300 Measurement of gas flow by means of critical flow nozzles*, 2022-06-16 Update
ISO 9614-1 Acoustics; determination of sound power levels of noise sources using sound intensity; part 1: measurement at discrete points
ISO 9809-1 Gas cylinders — Design, construction and testing of refillable seamless steel gas cylinders and tubes — Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MP*, 2019-08-22 Update
ISO 9951 Measurement of gas flow in closed conduits - Turbine meters; Technical Corrigendum 1
ISO/TR 15916 Basic considerations for the safety of hydrogen systems*, 2015-12-01 Update
ISO 22734-2:2011 history
2011ISO 22734-2:2011 Hydrogen generators using water electrolysis process - Part 2: Residential applications