GB/T 27547-2011
Elevating work platforms.Mast-climbing work platforms (English Version)

Standard No.

GB/T 27547-2011

Language

Chinese, Available in English version

Release Date

2011

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 27547-2011

Scope

This standard specifies the special safety requirements for guide frame climbing work platforms (hereinafter referred to as MCWP). MCWP is manually or power-operated, temporarily installed equipment that can carry one or more people for operation. This standard does not specifically stipulate how to deal with the requirements for handling, installing or dismantling, fixing or removing any materials or equipment that are not part of this MCWP. The hazards caused by the process, nor does it specifically specify the method of handling special hazardous materials. This standard does not specifically specify the requirements for transporting personnel and materials to fixed landings. For such facilities, please refer to elevators or construction hoists and other relevant standards. This standard also applies to permanently installed MCWP. For MCWP to which this standard applies, the operating platform is lifted by the drive system and guided and moved by the guide frame. Horizontal support may or may not be provided between the guide frame and the independent supporting structure. At the same time, the MEWP in this standard is applicable to any of the following optional combination types: - single guide frame or multiple guide frames; - with attached support or without attached support; - fixed height guide frame or variable height guide frame; — vertical guide frame or guide frame inclined from 0° to 30° to the vertical direction; — standing or suspended guide frame; — movable or fixed chassis (chassis or chassis); — manual or powered lifting; — Towed or self-propelled at the workplace without meeting the requirements of road traffic regulations; - driven by electric, pneumatic, hydraulic or internal combustion engines. This standard does not apply to mobile elevating work platforms (MEWP) in accordance with ISO 16368, gondolas for working at heights in accordance with EN 1808 and elevating platforms in accordance with EN 1570.

GB/T 27547-2011 Referenced Document

• EN 614-1 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
• EN 953 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (Incorporates Amendment A1: 2009)
• EN 982 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008
• GB 14048.5-2008 Low-voltage switchgear and controlgear.Part5-1: Control circuit devives and switching element.Electromechanical control circuit devices
• GB 23821 Safety of machinery-Safety distances to prevent hazard zones being reached by upper and lower limbs
• GB 4208 Degrees of protection provided by enclosure(IP code)
• GB 5226.1 Safety of machinery--Electrical equipment of machines--Part 1: General requirements*， 2019-06-04 Update
• GB 8898 Audio, video and similar electronic apparatus.Safety requirements*， 2011-12-30 Update
• GB/T 15706.2-2007 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
• GB/T 16855.1-2008 Safety of machinery.Safety related parts of control systems.Part 1: General principles for design
• GB/T 20863.1 Cranes—Classification—Part 1:General*， 2021-12-31 Update
• GB/T 22437.1 Cranes—Design principles for loads and load combinations—Part 1：General*， 2018-05-14 Update
• GB/T 3480.5 Calculation of load capacity of spur and helical gears—Part 5：Strength and quality of materials*， 2021-05-21 Update
• GB/T 3811 Design rules for cranes
• ISO 13854 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body*， 2017-11-01 Update
• ISO 6336-1 Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors*， 2019-11-27 Update
• ISO 6336-2 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)*， 2019-11-26 Update
• ISO 6336-3 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength*， 2019-11-26 Update

GB/T 27547-2011 history

• 2011 GB/T 27547-2011 Elevating work platforms.Mast-climbing work platforms