VDI 2700 Blatt 15-2009 PDF

Scope: This guideline applies to any slip-inhibiting materials used on road vehicles (see VDI 2700, Section 1.2.1). The present guideline defines the requirements applicable to this field of use. Transport conditions are of decisive importance when selecting suitable slip-inhibiting materials and corresponding methods for load securing. Not only should the dimensions, weight, and material of the load be taken into consideration, but also the specific characteristics of the loading surface. This guideline describes the possible applications, handling, use and safety requirements, inspection and criteria for disposal for slip-inhibiting materials in general, and for anti-slip mats in particular. Basically, Basically, all relevant guidelines and standards relating to load securing do apply, so that cargo can be transported safely and securely. Whenever slip-inhibiting materials are used properly, dangers can be avoided which could arise, for example, from a load being positioned on the slipinhibiting material in such a way that the load is also in direct contact at another point with the underlying surface (e. g. loading surface) which has a lower coefficient of friction than the slip-inhibiting material. To ensure safety, slip-inhibiting materials must be deployed in a way that they are externally visible without the load having to be lifted or shifted.

VDI 2700 Blatt 15-2009 Referenced Document

DIN 53516:1987 Testing of rubber and elastomers; determination of abrasion resistance
DIN 53587:1973
DIN EN 29073-3:1992 Textiles; test method for nonwovens; part 3: determination of tensile strength and elongation (ISO 9073-3:1989); german version EN 29073-3:1992
DIN EN ISO 13934-1:1999 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DIN EN ISO 13937-2:2000 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) (ISO 13937-2:2000); German version EN ISO 13937-2:2000
DIN EN ISO 4674-1:2003 Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003); German version EN ISO 4674-1:2003
DIN EN ISO 4674-2:1998 Rubber or plastics-coated fabrics - Determination of tear resistance - Part 2: Ballistic pendulum method (ISO 4674-2:1998); German version EN ISO 4674-2:1998
DIN ISO 4649:2006 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002) English version of DIN ISO 4649:2006-11
VDI 1000-2006 Richtlinienarbeit - Grundsaetze und Anleitungen
VDI 2700 Securing of loads on road vehicles
VDI 2700 Blatt 1-2005 Securing of loads on road vehicles - Training and contents of training
VDI 2700-2004 Securing of loads on road vehicles

2009 VDI 2700 Blatt 15-2009 Securing of loads on road vehicles - Slip-inhibiting materials
2006 VDI 2700 Blatt 15-2006 Securing of loads on road vehicles - Skid-inhibiting materials