VDI/VDE 2617 Blatt 5.1-2011
Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with ball plates

Standard No.

VDI/VDE 2617 Blatt 5.1-2011

Release Date

2011

Published By

Association of German Mechanical Engineers

Latest

VDI/VDE 2617 Blatt 5.1-2011

Replace

VDI/VDE 2617 Blatt 5.1-2000 VDI/VDE 2617 Blatt 5.1-2009

Scope

The guideline defines the design of ball plates as artefact for the monitoring of coordniate measuring machines. It describes the process of measurement and the evaluation using ball plates as artefact. Special regard was held on standardised artefacts, a standardised logging and an economic execution of the monitoring. The descriptive procedure is suitable as basis for an internal monitoring and also for a monitoring of coordinate measuring machines demanded of public or private clients. The described procedures fulfill in particular the requirements in accordance with DIN ISO 9004. It differs from the examinations in accordance with part 2.1 and part 3 of the guideline VDI/VDE 2617 in the range of the measurements, the used artefacts and the evaluation of the results.

VDI/VDE 2617 Blatt 5.1-2011 Referenced Document

• DIN 5401:2002 Rolling bearings - Balls for rolling bearings and general industrial use
• VDI 1000-2010 VDI Guideline Work - Principles and procedures
• VDI/VDE 2617 Blatt 1-1986 Genauigkeit von Koordinatenmessgeraeten; Kenngroessen und deren Pruefung; Grundlagen
• VDI/VDE 2617 Blatt 2.1-2005 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
• VDI/VDE 2617 Blatt 2.2-2000 Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement
• VDI/VDE 2617 Blatt 2.3-2006 Accuracy of coordinate measuring machines - Characteristics and checking of characteristics - Acceptance and reverification tests for coordinate measuring machines of large dimensions
• VDI/VDE 2617 Blatt 4-2006 Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation
• VDI/VDE 2617 Blatt 5-2001 Genauigkeit von Koordinatenmessgeraeten - Kenngroessen und deren Pruefung - Ueberwachung durch Pruefkoerper
• VDI/VDE 2617 Blatt 5-2009 Genauigkeit von Koordinatenmessgeraeten - Kenngroessen und deren Pruefung - Ueberwachung durch Pruefkoerper
• VDI/VDE 2617 Blatt 6.1-2007 Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral

VDI/VDE 2617 Blatt 5.1-2011 history

• 2011 VDI/VDE 2617 Blatt 5.1-2011 Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with ball plates
• 2000 VDI/VDE 2617 Blatt 5.1-2000 Genauigkeit von Koordinatenmessgeraeten - Kenngroessen und deren Pruefung - Ueberwachung mit Kugelplatten
• 1998 VDI/VDE 2617 Blatt 5.1-1998 Accuracy of coordinate measuring machines - Characteristics parameters and their checking - Periodical check by ball plates