VDI/VDE 2617 Blatt 12.1-2011 PDF

Scope: The guideline describes procedures for the examination of the efficiency of tactile coordinate measuring machines (CMM) of different designs for the measurement of micro geometry.By micro geometry thereby are usually understood geometries with dimensions of a few ?m up to approx. 1 mm. The characteristics described in the guideline serve the specification of CMM?s as well as the comparison of different CMM?s. It is valid for: Acceptance tests for the examination of the CMM and its test head according to the data of the manufacturer, reverification tests for the regular examination of the CMM and its test head by the operator and intermediate tests for the monitoring of the CMM and its test head by the operator between the reverification tests.Tactile CMM for the measurement of micro geometry are seized, which due to the small dimensions of the test element and/or the test pin which can not be examined according to the procedures and artefacts described in DIN EN ISO 10360-2, DIN EN ISO 10360-5 and VDI/VDE 2617 part 2.1. Normally are these CMM?s, whose test element diameter is smaller or equivalent 0.3 mm or their test pin is smaller than 5 mm.

VDI/VDE 2617 Blatt 12.1-2011 Referenced Document

DIN EN ISO 10360-1:2003 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002
DIN EN ISO 14253-1:1999 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specifications
DIN EN ISO 1:2002 Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specifications and verification (ISO 1:2002); German version EN ISO 1:2002
DIN EN ISO 3650:1999 Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998
DIN ISO/TS 23165:2008 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006)
VDI 1000-2010 VDI Guideline Work - Principles and procedures

2011 VDI/VDE 2617 Blatt 12.1-2011 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries
2009 VDI/VDE 2617 Blatt 12.1-2009 Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries