WARNING — This part of ISO 14184 calls for the use of substances and/or procedures that may be
injurious to health if adequate precautions are not taken. It refers only to technical suitability and does
not absolve the user from legal obligations relating to health and safety at any stage. It has been
assumed in the drafting of this part of ISO 14184 that the execution of its provisions is entrusted to
appropriately qualified and experienced people.
This part of ISO 14184 specifies a method for determining the amount of free formaldehyde and formaldehyde
extracted partly through hydrolysis by means of a water extraction method. The method can be applied to the
testing of textile samples in any form.
The procedure is intended for use in the range of free and hydrolysed formaldehyde on the fabric between
16 mg/kg and 3 500 mg/kg when determined by this method. The lower limit is 16 mg/kg. Below this limit, the
result is reported as “not detectable”.
A method for determination of released formaldehyde is given in ISO 14184-2.
BS EN ISO 14184-1:2011 Referenced Document
ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO 4793:1980 Laboratory sintered (fritted) filters; Porosity grading, classification and designation
BS EN ISO 14184-1:2011 history
2011BS EN ISO 14184-1:2011 Textiles. Determination of formaldehyde. Free and hydrolised formaldehyde (water extraction method)
1999BS EN ISO 14184-1:1999 Textiles - Determination of formaldehyde - Free and hydrolyzed formaldehyde (water extraction method)