ASTM D1676-03(2011)
Standard Test Methods for Film-Insulated Magnet Wire

Standard No.

ASTM D1676-03(2011)

Release Date

2003

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D1676-17

Latest

ASTM D1676-17

Scope

Bond strength values obtained by flexural tests can provide information with regard to the bond strength of a particular self-bonding outer coating in combination with a particular round film-insulated magnet wire when measured under conditions described in this test method.

1.1 These test methods cover procedures for testing film-insulated magnet wire that is used in electrical apparatus. These test methods are intended primarily for the evaluation of the electrical insulating materials used. The intent is that these test methods be used, except where modified, by individual specifications for particular applications.

1.2 These test methods present different procedures for evaluating given properties of round, rectangular or square, copper or aluminum film-insulated magnet wire.

1.3 The values stated in inch-pound units are the standard. The SI units in parentheses are provided for information only.

1.4 The test methods appear in the following sections:

	Sections
Bond Strength	4-12
Burnout (AC Overload Resistance)	13-21
Chemical Resistance	22-28
Coefficient of Friction	29-37
Continuity, DC High Voltage	38-45
Continuity, DC Low Voltage	46-53
Completeness of Cure	54-60
Cut-Through Temperature (Thermoplastic Flow)	61-68
Dielectric Breakdown AC Voltage	69-75
Dielectric Breakdown nbsp;nbsp;nbsp;ACnbsp;nbsp;nbsp;Voltage after Bending	76-82
Dielectric Breakdown AC Voltage at Elevated Temperatures	83-89
Dielectric Breakdown AC Voltage after Conditioning in Refrigerant Atmosphere	90-99
Dimensional Measurement	100-106
Dissipation Factor Measurement	107-114
Electrical Resistance	115-121
Elongation	122-129
Extractables, Refrigerant	130-140
Film Adherence and Flexibility	141-148
Formability:
a) Elastic Ratio	152
b) Low Stress Elongation	153
c) Spring Back	154-155
Heat Shock	156-162
Oiliness	1...... ASTM D1676-03(2011) Referenced Document ASTM A228/A228M Standard Specification for Steel Wire, Music Spring Quality ASTM B193 Standard Test Method for Resistivity of Electrical Conductor Materials ASTM B279 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication ASTM B3 Standard Specification for Soft or Annealed Copper Wire ASTM B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes ASTM B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes ASTM B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes ASTM D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies ASTM D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation ASTM D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration*， 2024-04-19 Update ASTM D1711 Standard Terminology Relating to Electrical Insulation ASTM D2475 Standard Specification for Felt ASTM D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test ASTM D374 Standard Test Methods for Thickness of Solid Electrical Insulation ASTM D5423 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation ASTM D877 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes ASTM E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis ASTM E1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis ASTM E220 Standard Test Method for Calibration of Thermocouples By Comparison Techniques ASTM E4 Standard Practices for Force Verification of Testing Machines ASTM E6 Standard Terminology Relating to Methods of Mechanical Testing ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials ASTM D1676-03(2011) history 2017 ASTM D1676-17 Standard Test Methods for Film-Insulated Magnet Wire 2003 ASTM D1676-03(2011) Standard Test Methods for Film-Insulated Magnet Wire 2003 ASTM D1676-03 Standard Test Methods for Film-Insulated Magnet Wire 2002 ASTM D1676-02 Standard Test Methods for Film-Insulated Magnet Wire 2001 ASTM D1676-01 Standard Test Methods for Film-Insulated Magnet Wire 1999 ASTM D1676-99 Standard Test Methods for Film-Insulated Magnet Wire Copyright ©2024 All Rights Reserved