ASTM D1675-03(2011)
Standard Test Methods for Polytetrafluoroethylene Tubing

Standard No.

ASTM D1675-03(2011)

Release Date

2003

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D1675-18

Latest

ASTM D1675-18

Scope

The test methods in this standard are considered important to characterize polytetrafluoroethylene tubing. They are intended primarily for, but not limited to polytetrafluoroethylene tubing.

Variations in these methods or alternate contemporary methods of measurement may be used to determine the values for the properties in this standard provided such methods ensure quality levels and measurement accuracy equal to or better than those prescribed herein. It is the responsibility of the organizations using alternate test methods to be able to demonstrate this condition. In cases of dispute, the methods specified herein shall be used.

Note 28212;Provision for alternate methods is necessary because of (1) the desire to simplify procedures for specific applications, and (2) the desire to eliminate redundant testing and use data generated during manufacturing process control, including that generated under Statistical Process Control (SPC) conditions, using equipment and methods other than those specified herein. An example would be the use of laser micrometers or optical comparators to measure dimensions.

1.1 These test methods cover procedures for testing polytetrafluoroethylene tubing for use as electrical insulation. The procedures appear in the following sections:

ASTM D1675-03(2011) Referenced Document

• ASTM D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
• ASTM D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique
• ASTM D1711 Standard Terminology Relating to Electrical Insulation
• ASTM D3418 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
• ASTM D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
• ASTM D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
• ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
• ASTM D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation*， 2024-04-19 Update
• ASTM E176 Standard Terminology of Fire Standards

ASTM D1675-03(2011) history

• 2018 ASTM D1675-18 Standard Test Methods for Polytetrafluoroethylene Tubing
• 2003 ASTM D1675-03(2011) Standard Test Methods for Polytetrafluoroethylene Tubing
• 2003 ASTM D1675-03 Standard Test Methods for Polytetrafluoroethylene Tubing
• 1998 ASTM D1675-98 Standard Test Methods for Polytetrafluoroethylene Tubing