1 This part of ISO 10524 applies to pressure regulators integrated with cylinder valves (as defined in 3.16) intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients for use with the following medical gases:
— oxygen;
— nitrous oxide;
— air for breathing;
— helium;
— carbon dioxide;
— xenon;
— specified mixtures of the gases listed above;
— air for driving surgical tools;
— nitrogen for driving surgical tools.
2 These pressure regulators integrated with cylinder valves are intended to be fitted to cylinders with nominal filling pressures up to 25 000 kPa at 15 ℃ and can be provided with devices that control and measure the flow of the medical gas delivered.
ISO 10524-3:2005 Referenced Document
EN 13544-2:2002 Respiratory therapy equipment - Part 2: Tubing and connectors (Incorporates Amendment A1: 2009)*, 2024-04-18 Update
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN ISO 11116-1:1999 Gas Cylinders - 17E Taper Thread for Connection of Valves to Gas Cylinders - Part 1: Specifications ISO 11116-1:1999
IEC 60601-1:1988 Medical electrical equipment; part 1: general requirements for safety
ISO 10920:1997 Gas cylinders - 25E taper thread for connection of valves to gas cylinders - Specification
ISO 11117:1998 Gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
ISO 13341:1997 Transportable gas cylinders - Fitting of valves to gas cylinders
ISO 14971:2000 Medical devices - Application of risk management to medical devices
ISO 15001:2003 Anaesthetic and respiratory equipment - Compatibility with oxygen
ISO 15245-1:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
ISO 32:1977 Gas cylinders for medical use; Marking for identification of content
ISO 407:2004 Small medical gas cylinders - Pin-index yoke-type valve connections
ISO 5145 Gas cylinders - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning*, 2017-11-01 Update
ISO 5359:2000 Low-pressure hose assemblies for use with medical gases
ISO 7396-1:2002 Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum
ISO 9170-1:1999 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
ISO/TR 7470:1988 Valve outlets for gas cylinders; list of provisions which are either standardized or in use
ISO 10524-3:2005 history
2019ISO 10524-3:2019 Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
2013ISO 10524-3:2005/Amd 1:2013 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer
2005ISO 10524-3:2005 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves