SAE AMS7276H-2011 PDF

Scope: This specification covers a fluorocabron (FKM) rubber in the form of O-rings, compression seals, O-ring cord and molded in place gaskets. These rings have been used typically as sealing rings, compression seals, O-ring cord and molded-in-place gaskets in contact with air or a variety of fuels, lubricants and specific hydraulic fluids from -20 to +400 °F (-29 to +240 °C), but usage is not limited to such applications. Each application should be considered individually. This class of fluoroelastomers may not be suitable for use in some high temperature stabized, "HTS", engine oils. Each "HTS" oil should be evaluated separately. Examples of "HTS" oils are those oils conforming to MIL-PRF-23699 Class HTS, MIL-PRF-7808 Grade 4, and AS5780 Class HPC.

SAE AMS7276H-2011 Referenced Document

ASTM D1329-08 Standard Test Method for Evaluating Rubber Propertyx2014;Retraction at Lower Temperatures (TR Test)*， 2024-04-19 Update
ASTM D2240-05 Standard Test Method for Rubber Property8212;Durometer Hardness*， 2024-04-19 Update
ASTM D395-03 Standard Test Methods for Rubber Property8212;Compression Set*， 2024-04-19 Update
ASTM D471-10 Standard Test Method for Rubber Propertyx2014;Effect of Liquids*， 2024-04-19 Update
ASTM D573-04 Standard Test Method for Rubber8212;Deterioration in an Air Oven*， 2024-04-19 Update
ISO 3601-1:2008 Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-3:2005 Fluid power systems - O-rings - Part 3: Quality acceptance criteria
SAE AIR851 O-RING TENSION TESTING CALCULATIONS
SAE AMS2817 PACKAGING AND IDENTIFICATION Preformed Packings
SAE AMS3023-1995 Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
SAE AS3208-1976 Packing, Preformed - AMS 7276 - Seal
SAE AS3209-1976 Packing, Preformed - AMS 7276,'O' Ring
SAE AS568 Aerospace Size Standard for O-Rings
SAE AS871 PREFORMED PACKING - DIMENSIONAL INSPECTION GUIDE

2020 SAE AMS7276J-2020 Rubber: Fluorocarbon (FKM) High Temperature - Fluid Resistant Low Compression Set/70 to 80 Type A Hardness For Seals in Fuel Systems and Specific Engine Oil Systems
2011 SAE AMS7276H-2011 Rubber: Fluorocarbon (FKM) High-Temperature-Fluid Resistant Low Compression Set For Seals in Fuel Systems and Specific Engine Oil Systems
2001 SAE AMS7276G-2001 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
1998 SAE AMS7276F-1998 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
1997 SAE AMS7276E-1997 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 70 to 80
1992 SAE AMS7276D-1992 Rings@ Sealing@ Fluorocarbon (FKM) Rubber High-Temperature- Fluid Resistant Very-Low Compression Set 70 - 80 ((Superseded AMS 7280F))
1990 SAE AMS7276C-1990 RINGS, SEALING, FLUOROCARBON (FKM) RUBBER High-Temperature Fluid Resistant Very-Low Compression Set 70 - 80
1989 SAE AMS7276A-1989 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid Resistant, Very-Low Compression Set FKM Type 70 - 80
1984 SAE AMS7276B-1984 RINGS@ SEALING@ FLUOROCARBON (FKM) RUBBER High-Temperature Fluid Resistant Very Low Compression Set 70 - 80
1974 SAE AMS7276-1974 RINGS, SEALING, FLUOROCARBON RUBBER High-Temperature-Fluid-Resistant, Very-Low-Compression-Set FKM Type 70 - 80