BS EN 60099-8:2011
Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

Standard No.
BS EN 60099-8:2011
Release Date
2011
Published By
British Standards Institution (BSI)
Latest
BS EN 60099-8:2011
Replace By
SAE J 1453/1-2012
Scope
This part of IEC 60099 covers metal-oxide surge arresters with external series gap (externally gapped line arresters (EGLA) that are applied on overhead transmission and distribution lines, only to protect insulator assemblies from lightning-caused flashovers. This standard defines surge arresters to protect the insulator assembly from lightning-caused overvoltages only. Therefore, and since the metal-oxide resistors are not permanently connected to the line, the following items are not considered for this standard: • switching impulse sparkover voltage; • residual voltage at steep current and switching current impulse; • thermal stability; • long-duration current impulse withstand duty; • power-frequency voltage versus time characteristics of an arrester; • disconnector test; • aging duties by power-frequency voltage. Considering the particular design concept and the special application on overhead transmission and distribution lines, some unique requirements and tests are introduced, such as the verification test for coordination between insulator withstand and EGLA protective level, the follow current interrupting test, mechanical load tests, etc. Designs with the EGLA's external series gap installed in parallel to an insulator are not covered by this standard.

BS EN 60099-8:2011 Referenced Document

  • ISO 3274 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments; Technical Corrigendum 1
  • ISO 4287 Geometrical product specifications (GPS) — Surface finish: Profile method — Surface finish terms, definitions and parameters — Amendment 2: .
  • ISO 4892-1 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance*2016-05-01 Update
  • ISO 4892-2 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1: Classification of daylight filters*2021-08-03 Update
  • ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps*2016-02-01 Update

BS EN 60099-8:2011 history

  • 2011 BS EN 60099-8:2011 Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV



Copyright ©2024 All Rights Reserved