BS EN ISO 20884:2011
Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry

Standard No.
BS EN ISO 20884:2011
Release Date
2011
Published By
British Standards Institution (BSI)
Status
Replace By
BS EN ISO 20884:2019
Latest
BS EN ISO 20884:2019+A1:2021
Replace
BS EN ISO 20884:2004
Scope
WARNING — The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. This International Standard specifies a wavelength-dispersive X-ray fluorescence (WDXRF) test method for the determination of the sulfur content of liquid, homogeneous automotive fuels from 5 mg/kg to 500 mg/kg, which have a maximum oxygen content of 3,7 % (m/m). This product range covers diesel fuels containing up to about 10 % (V/V) fatty acid methyl esters (FAME) and motor gasolines containing up to about 10 % (V/V) ethanol. NOTE 1 Sulfur contents higher than 500 mg/kg can be determined after sample dilution. However, the precision was not established for diluted samples. Products with higher oxygen content show significant matrix effects, e.g. FAME used as biodiesel. Nevertheless, FAME may be analysed when the corresponding procedures are followed (see 4.3 and 7.1). Other products may be analysed with this test method. However, precision data for products other than those mentioned have not been established for this International Standard. NOTE 2 For the purposes of this International Standard, the terms “% (m/m)” and “% (V/V)” are used to represent the mass fraction and the volume fraction of a material respectively.

BS EN ISO 20884:2011 Referenced Document

  • ISO 3170 Petroleum liquids - Manual sampling
  • ISO 3171 Petroleum liquids; automatic pipeline sampling

BS EN ISO 20884:2011 history

  • 2022 BS EN ISO 20884:2019+A1:2021 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
  • 2019 BS EN ISO 20884:2019 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
  • 2011 BS EN ISO 20884:2011 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
  • 0000 BS EN ISO 20884:2004



Copyright ©2024 All Rights Reserved