SAE AMS6312H-2011
Steel Bars, Forgings, and Tubing, 1.8Ni 0.25Mo (0.38-0.43C) (4640)

Standard No.
SAE AMS6312H-2011
Release Date
2011
Published By
Society of Automotive Engineers (SAE)
Status
 2015-12
Replace By
SAE AMS6312J-2015
Latest
SAE AMS6312K-2020
Scope
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. These products have been used typically for parts 0.250 inch (6.35 mm) and under in nominal section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 50 HRC and also parts of greater thickness requiring proportionately lower hardness, but usage is not limited to such applications.

SAE AMS6312H-2011 Referenced Document

  • ASTM A255-10 Standard Test Methods for Determining Hardenability of Steel*2024-04-19 Update
  • ASTM A370-10 Standard Test Methods and Definitions for Mechanical Testing of Steel Products*2024-04-19 Update
  • ASTM A370-11 Standard Test Methods and Definitions for Mechanical Testing of Steel Products*2024-04-19 Update
  • ASTM E112-10 Standard Test Methods for Determining Average Grain Size*2024-04-19 Update
  • ASTM E381-01 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings*2024-04-19 Update
  • ASTM E384-10 Standard Test Method for Microindentation Hardness of Materials*2024-04-19 Update
  • ASTM E384-11 Standard Test Method for Knoop and Vickers Hardness of Materials*2024-04-19 Update
  • SAE AMS-H-6875-1998 Heat Treatment of Steel, Process for
  • SAE AMS2251 TOLERANCES Alloy Steel Bars
  • SAE AMS2259 CHEMICAL CHECK ANALYSIS LIMITS Wrought Low-Alloy and Carbon Steels
  • SAE AMS2301K-2010 Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
  • SAE AMS2370 QUALITY ASSURANCE SAMPLING OF CARBON AND LOW ALLOY STEELS Wrought Products Except Forgings
  • SAE AMS2372 QUALITY ASSURANCE SAMPLING OF CARBON AND LOW ALLOY STEELS Forgings and Forging Stock
  • SAE AMS2806 IDENTIFICATION Bars, Wire, Mechanical Tubing, and Extrusions Carbon and Alloy Steels and Heat and Corrosion Resistant Steels and Alloys

SAE AMS6312H-2011 history

  • 2020 SAE AMS6312K-2020 Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
  • 2015 SAE AMS6312J-2015 Steel Bars@ Forgings@ and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) (UNS K22440)
  • 2011 SAE AMS6312H-2011 Steel Bars, Forgings, and Tubing, 1.8Ni 0.25Mo (0.38-0.43C) (4640)
  • 2006 SAE AMS6312G-2006 Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4640) UNS K22440
  • 2001 SAE AMS6312F-2001 Steel Bars, Forgings, and Tubing, 1.8Ni 0.25Mo (038-0.43C) (SAE 4640)
  • 1994 SAE AMS6312E-1994 STEEL BARS, FORGINGS, AND TUBING 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
  • 1988 SAE AMS6312E-1988 Steel Bars@ Forgings@ and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) (UNS K22440)
  • 1981 SAE AMS6312D-1981 STEEL BARS@ FORGINGS@ AND TUBING 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
  • 1978 SAE AMS6312C-1978 Steel Bars@ Forgings@ and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
  • 1971 SAE AMS6312B-1971 STEEL BARS@ FORGINGS@ AND TUBING 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)
  • 1942 SAE AMS6312A-1942 STEEL Nickel Molybdenum
  • 1939 SAE AMS6312-1939 STEEL Nickel Molybdenum



Copyright ©2024 All Rights Reserved