YB/T 4233-2010
Snort valve for BF (English Version)
- Standard No.
- YB/T 4233-2010
- Language
- Chinese, Available in English version
- Release Date
- 2010
- Published By
- Professional Standard - Ferrous Metallurgy
- Status
- Latest
- YB/T 4233-2010
- Replace By
- GOST 11970.0-2003
- Scope
- This standard specifies the terms and definitions, specifications, models, technical requirements, test methods, inspection rules, marking and packaging, storage and transportation, installation and use requirements of blast furnace cold air relief valves. This standard is applicable to blast furnace cold air relief valves with working pressure not greater than 0.6MPa, working temperature not greater than 300°C, and nominal dimensions DN500 to DN2200.
YB/T 4233-2010 Referenced Document
- GB/T 1220 Stainless steel bars
- GB/T 12223 Connections for part-turn valve actuators*， 2023-05-23 Update
- GB/T 3077 Alloy structure steels*， 2015-12-10 Update
- GB/T 5117 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels*， 2012-11-05 Update
- GB/T 699 Quality carbon structure steels*， 2015-12-10 Update
- GB/T 700 Carbon structural steels
- GB/T 9119 Slip-on-welding plate steel pipe flanges*， 2011-01-14 Update
- GB/T 9124-2000 Specification for steel pipe flanges
- GB/T 983 Covered electrodes for manual metal arc welding of stainless and heat-resisting steels*， 2012-11-05 Update
- GB/T 984 Hardfacing electrodes for shielded metal arc welding
- GB/T 985.1 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding
- JB/T 5000.12-2007 Heavy mechanical general techniques and standards.Part 12: Paint
- JB/T 5000.13 Heavy mechanicai general techniques and standards.Part 13: Packing
- JB/T 5000.3-2007 Heavy mectlanical general techniqueg.Part 3: And standards welding
- JB/T 5000.4 Heavy mechanical general techniques and standards.Payt4: Iron cating
- JB/T 5000.6 Heavy mechanical general techniques and standards.Part 6: Steel castings
- JB/T 5000.9 Heavy mechanical general techniques and standards.Part 9: Cutting
- JB/T 6046 Welding assembly for carbon steel and low alloy steel Post-welding heat treatment method
- YB/T 4059 High temperature cladding metal O-ring
YB/T 4233-2010 history
- 2010 YB/T 4233-2010 Snort valve for BF
YB/T 4233-2010 Snort valve for BF was changed to GOST 11970.0-2003 Textile materials. Threads. The series of nominal values of linear density of single cotton yarn.
