ISO 22967:2010
Forced draught gas burners

Standard No.

ISO 22967:2010

Release Date

2010

Published By

International Organization for Standardization (ISO)

Latest

ISO 22967:2010

Scope

This International Standard specifies the terminology, test procedures and general requirements for the construction and operation of automatic forced draught gas burners, and the provision of related control and safety devices. It is applicable to the following: a) automatic gas burners (hereinafter called “burners”) fitted with a combustion air fan that are equipped as described in Clause 4, intended for use in appliances of different types and operated with fuel gases; b) total pre-mixed burners and nozzle mixed burners; c) single burners with a single combustion chamber, for which, where such burners are fitted to a single appliance, the requirements of the relevant appliance standard also apply; d) single-fuel and dual-fuel burners when operating only on gas; e) the gas function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, which, for the latter, the requirements of ISO 22968 also apply. It is not applicable to burners used in direct fired processes either with defined combustion chamber applications or where the combustion chamber wall surface temperature is greater than 750 °C or the heat-transfer medium temperature is greater than 500 °C.

ISO 22967:2010 Referenced Document

• IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements*， 2024-04-19 Update
• IEC 60335-1:2001 Household and similar electrical appliances - Safety - Part 1: General requirements
• IEC 60335-2-102:2004 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
• IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*， 2024-04-19 Update
• IEC 60730-2-5:2004 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
• IEC 60730-2-6 Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements CONSOLIDATED EDITION*， 2019-09-23 Update
• IEC 60947-5-1 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices*， 2024-03-26 Update
• IEC 61810-1 Amendment 1 - Electromechanical elementary relays - Part 1: General and safety requirements*， 2019-01-01 Update
• ISO 1129 Steel tubes for boilers, superheaters and heat exchangers; Dimensions, tolerances and conventional masses per unit length
• ISO 228-1 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
• ISO 22968 Forced draught oil burners
• ISO 23551-1 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves*， 2012-08-01 Update
• ISO 23551-2 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 2: Pressure regulators*， 2018-08-31 Update
• ISO 23551-3 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 3: Gas/air ratio controls, pneumatic type
• ISO 23551-4 Safety and control devices for gas burners and gas-burning appliances - Particular requirements - Part 4: Valve-proving systems for automatic shut-off valves*， 2018-04-01 Update
• ISO 23552-1 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type AMENDMENT 1: Addition to the specific regional requirements in Japan
• ISO 3183 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems*， 2019-10-07 Update
• ISO 7005 Metallic flanges; part 3: copper alloy and composite flanges
• ISO 9329-1 Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steels with specified room temperature properties
• ISO 9330-1 Welded steel tubes for pressure purposes; technical delivery conditions; part 1: unalloyed steel tubes with specified room temperatures properties

ISO 22967:2010 history

• 2010 ISO 22967:2010 Forced draught gas burners