GOST 26611-1985
Straigh luming undercutting and coping tool holders with clamped changeable inserts pressed from the top. Desing and dimensions

Standard No.

GOST 26611-1985

Release Date

1985

Published By

RU-GOST R

Latest

GOST 26611-1985

Scope

This standard applies to turning tools with mechanically fastened interchangeable polyhedral inserts intended for cutting

GOST 26611-1985 Referenced Document

• GOST 17475-1980 Countersunk head screws product grades A and B. Construction and dimensions
• GOST 19043-1980 Triangular throw-away (indexable) carbide cutting inserts. Design and dimensions*， 2024-04-19 Update
• GOST 19045-1980 Triangular throw-away (indexable) carbide cutting inserts with 11° end-clearance angle. Design and dimensions*， 2024-04-19 Update
• GOST 19047-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80° included angle and cylindrical holes. Design and dimensions*， 2024-04-19 Update
• GOST 19049-1980 Square throw-away (indexable) carbide cutting inserts. Design and dimensions*， 2024-04-19 Update
• GOST 19050-1980 Square throw-away (indexable) carbide cutting inserts with 11° end-clearance angle. Design and dimensions
• GOST 19056-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80° included angle. Design and dimensions
• GOST 19073-1980 Triangular throw-away (indexable) carbide shims. Design and dimensions
• GOST 19074-1980 Triangular throw-away (indexable) carbide shims with end-clearance angle. Design and dimensions
• GOST 19076-1980 Square throw-away (indexable) carbide shims. Design and dimensions
• GOST 19077-1980 Square throw-away (indexable) carbide shims with end-clearance angle. Design and dimensions
• GOST 19078-1980 Rhombic throw-away (indexable) carbide shims with 80° included angle. Design and dimensions
• GOST 19083-1980 Round throw-away (indexable) carbide shims. Design and dimensions
• GOST 19084-1980 Triangular throw-away (indexable) carbide chip breakers. Design and dimensions
• GOST 19085-1980 Square throw-away (indexable) carbide chip breakers. Design and dimensions
• GOST 25003-1981 Ceramic indexable throw-away inserts for cutting tools. Specifications

GOST 26611-1985 history

• 1985 GOST 26611-1985 Straigh luming undercutting and coping tool holders with clamped changeable inserts pressed from the top. Desing and dimensions